1. T Bar Handlebars

Grid List
…1/2" (13mm), H-Bars will not fit. Depending on the height of the handlebars you're trying to replace, cable and wire length may be an issue-if you're not confident your ability to install bars, please consult a professional. These bars look great on: FXR's, Sportsters, rigid Triumph customs or any…
…from center of clamping area to top of T bar, Biltwell Window bars fall into the "tall" category. A mere 10 degrees of back sweep gives these bars a flat T-bar style that works best on motorcycles with stock backbone lengths. Depending on the height of the bars you're replacing, longer cables and…
Drag Specialties 1-1/4" Radius T-Bars The ultimate handlebar, designed for maximum comfort Brilliantly show chromed Smooth transition from 1-1/4" bar area to the 1" control area Accepts standard 1" controls 6" pull back on 6" riser; 8" pull back on 8" riser 31" (Kawasaki)-33-1/2" (Honda and Yamaha)…
Drag Specialties 1-1/4" Buffalo T-Bar The ultimate 1 1/4" diameter handlebar, designed for maximum comfort Drilled for internal wires; work with standard controls Available with a show chrome or gloss black finish Gauge mounts for T-Bars available and sold separately Made in the U.S.A.
Emgo Chopper T Handlebars
$62.99 You save $6.96 (9%)
(5)
Emgo Chopper T Handlebars Get a brand new set of bars for your bike with Emgo's quality handlebars. Made of sturdy carbon steel, you will have the confidence in your controls. 7/8" diameter Available in show-chrome finish Seamless steel tubing construction Sizing: Width: 27-1/2" Rise: 6" Pullback:…
Drag Specialties 1-1/2" Radius T-Bars The ultimate handlebar, designed for maximum comfort Brilliantly show chromed Accepts standard 1" controls 6-1/2" pull back on Raider, 7" pull back on VTX and approx. 12" pull back on Victory's 33-1/2" wide Mounting bolts sold separately Made in the U.S.A.…
…center to center, Biltwell Low Drag bars will not fit. If the holes for riser hardware (either rubber isolator or solid mount type) in your top tree are not 1/2" (13mm), Low Drag bars will not fit. Because our Low Drag bar's height is similar to stock handlebars, cable and wiring probably won't…
Drag Specialties 1 ½ " Big Buffalo Bars 1-1/2" diameter chrome-plated handlebars for the "biggest fattest" look. Custom bends for the ultimate in comfort 1.5" bars taper to 1" at the grip/control area Drilled and dimpled for stock Harley Davidson controls and fit most metric controls with little to…
…top tree are not 1/2" (13mm), High Drag bars will not fit. Depending on the height of the handlebars you're trying to replace, cable and wire length may be an issue-if you're not confident your ability to install bars, please consult a professional. These bars look great on: FXR's, Sportsters, rigid…
…icon in the photo album. These handlebars are not dimpled because 7/8-inch O.D. handlebars do not fit stock Harley hand controls. Fitment: At 7 inches from center of clamping area to center of the top bend, Frisco bars are 2 to 5 inches taller than most stock handlebars. The nearly flat back sweep…
Drag Specialties 1-1/2" Standard T-Bars The ultimate handlebar, designed for maximum comfort Brilliantly show chromed Accepts standard 1" controls 5-1/2" pull back on 6" riser; 7-1/2" pull back on 8" riser 33-1/2" wide 100mm riser center width Mounting bolts sold separately Made in the U.S.A. Thread…
Drag Specialties 1-1/4" Standard T-Bars The ultimate handlebar, designed for maximum comfort Brilliantly show chromed Smooth transition from 1-1/4" bar area to the 1" control area Accepts standard 1" controls 5-1/2" pull back on 6" riser; 7-1/2" pull back on 8" riser 31-1/2" wide 100mm riser center…
L.A. Choppers Stainless Handlebar Cable and Brake Line Kit
$211.99 - $368.99 You save up to $40.96 (9%)
(1)
L.A. Choppers Stainless Handlebar Cable and Brake Line Kit Figuring out the correct cable length when changing handlebars can be a headache. L.A. Choppers Handlebar Cable and Brake Line Kits give you the correct length cables and brake lines you need to complete a handlebar swap, install the new…
Drag Specialties 1-1/2" Super Radius T-Bars The ultimate handlebar, designed for maximum comfort Brilliantly show chromed Accepts standard 1" controls 9" pull back on Raider, 15" pull back on VTX and 15" pull back on Victory's 33"-33-1/2" wide Mounting bolts sold separately Made in the U.S.A. Thread…
Drag Specialties 1-1/4" Super Radius T-Bars The ultimate handlebar, designed for maximum comfort Brilliantly show chromed Smooth transition from 1-1/4" bar area to the 1" control area Accepts standard 1" controls 10-1/2" pull back on 6" riser; 11-1/2" pull back on 8" riser 32-1/2" wide 100mm riser…
…Made from top quality 6061-T6 aluminum Contoured to the shape of the handlebar for better fit Special U shaped inner-clamps for more cable/control space More clamp sizes to closely fit different brands of handlebars All mounting hardware is included, replacement hardware available A perfect…
…Included grip protectors allow handguard removal for motocross Fit all aluminum 7/8” and taper-style handlebars Mounting hardware included Sold in pairs **Note: 1-1/8" size fits Flex Series, Pro-Taper, FMF, Tag and Fat Bar handlebars. 7/8" fits standard steel and aluminum handlebars.
Renthal Clip On Handlebars
$169.99 You save $29.96 (14%)
(1)
…from billet aluminium, each set comes complete with bar tubes made from the same 7010 aluminium which Renthal's legendary motocross handlebars. Features: Fork Clamps machined from 7075 T-6 billet aluminium and anodised factory black Handlebar tubes machined from 7010 aluminium and hard anodised…
Moose Racing Competition 7/8" ATV Handlebars These 7/8" 2014 T-6 aluminum bars have great vibration-absorption qualities and are stronger than 6061 bars Knurled clutch side helps reduce grip slip Available anodized in black, blue, red or silver Oversized crossbar for greater strength Crossbar pad…
…Crossbar clamps Manufactured from 6061 T6 aircraft aluminum Knurled center section and clutch end Available in polished or brilliant anodized color Bar pad included Reduces rider fatigue by absorbing impact, shock and vibration *Note: ATV F Bend has a V shaped crossbar. **Closeouts are limited to…
…a pair of these Moose Racing Flex Series 1-1/8" Oversized ATV Handlebars. The Flex design minimizes shock to the rider's arms and reduces rider fatigue.Constructed of high-quality 7065 T-6 aluminum Lighter and stronger than regular bars No-cross brace allows flex to reduce shock and rider fatigue…
Back to Top