1. Springer

Grid List
Biker's Choice Chrome Springer Forks
$626.99 You save $68.96 (9%)
(0)
…Chrome Springer Forks Requires set of 4” or 6” risers Includes axle and removable fender tabs Fits most Big Twins with cast neck 49-Up (exc. FXR, Dyna and Touring) Requires 1" steering stem bearings Also available with black powder-coated finish How To Measure For Springer Front Ends…
Biker's Choice Black Springer Forks
$626.99 You save $68.96 (9%)
(0)
…Choice Black Springer Forks Requires set of 4” or 6” risers Includes axle and removable fender tabs Fits most Big Twins with cast neck 49-Up (exc. FXR, Dyna and Touring) Requires 1" steering stem bearings Also available with chrome finish How To Measure For Springer Front Ends Measure…
Roland Sands Design Vintage Short Stack Handlebars
$287.99 - $305.99 You save up to $33.96 (9%)
(1)
…black powder-coated bars are knurled, slotted and drilled for internal wiring Raw handlebars are knurled, but not drilled Standard bars have 3 1/2" on-center knurling; Springer bars have 4 3/4" on-center knurling Feature chrome billet end caps Bars measure (30"; Wide; 7.5"; Rise; 6.5"; Center Width)
Drag Specialties Springer Front Fender Raw stamped-steel-construction fender maintains a low-tire profile on H-D Springer models Comes complete with chrome mounts Attach with OEM hardware Bike fitments are based on OEM equipment. Item may vary from image.
Biker's Choice 1-1/4" Springer Dragster Fat Bars 1-1/4" thick handlebars for Springer front forks Smooth swaged design Pre-drilled, dimpled and knurled for internal wiring Works with all standard controls, grips and risers Polished and chromed finished Made in U.S.A. Measure: 30.5" wide, 0 rise,…
Burly Disassembly Tool
$35.99 You save $3.96 (9%)
(0)
Burly Disassembly Tool Disassembly tool for fork lowering kit Designed to assemble and disassemble OEM Springer forks Facilitates the removal and installation of both the rebound and compression fork springs **Note: For 89-06 FXSTS Models
Paughco T-Bar Clamp
$206.99 You save $9.96 (4%)
(0)
Paughco T-Bar Clamp Allows mounting of most handlebars or risers with standard 3 1/2" bolt centers. Fits most Springer top trees with 4 3/4" hole centers Steel construction with a chrome finish Must use with Mount Kit (available separately) Made in the U.S.A.
Roland Sands Design Vintage Handlebars
$287.99 - $305.99 You save up to $33.96 (9%)
(4)
…are knurled, slotted and drilled for internal wiring Raw handlebars are knurled, but not drilled Standard bars have 3 1/2" on-center knurling; Springer bars have 4 3/4" on-center knurling Feature chrome billet end caps Bars measure (30"; Wide; 12"; Rise; 6.5"; Center Width) For RSD custom risers…
Burly Fork Lowering Kit
$134.99 You save $14.96 (9%)
(0)
Burly Fork Lowering Kit The quickest and easiest way to lower front forks by 1-1/2" Comes with two chrome compression springs, spring spacers and bushings Requires Burly's disassembly tool to install Designed to work with OEM Springer forks Made in the U.S.A.
Paughco 5-3 4 Drag-Ness Custom Headlight
$106.29 You save $11.66 (9%)
(0)
…old bottom-mount style Includes a 12V sealed beam and heavy-duty mounting brackets riveted onto the headlight shell Headlight mounting block on Springer models must be turned around for proper spring clearance Made in the U.S.A. by Paughco Motorcycle Accessories **Note: Headlight does not have a…
Vance & Hines Softail Duals Exhaust System
$652.99 You save $71.96 (9%)
(1)
…give the performance and sound you would expect with standard louver core baffles and optional fishtail tips Enhance the nostalgic look of a Springer Softail or any other Softail model Mufflers are matched straight-cut Slip-ons with billet tips Equipped with louvered core baffles standard, optional…
Back to Top