1. Seat Mounting Brackets

Grid List
Search Suggestions: Seat Bracket | Seat Mount | Seats | Solo Seat | Brackets
Mustang Solo Studded Seat with Backrest
$458.99 - $508.99 You save up to $56.01 (9%)
(0)
…adjustments from 13.5" to 15.5" above seat bucket, and measures 7" high by 12" wide Backrest is easily removed and installed without tools; folds forward for easy mounting of bike Made in the U.S.A. 00-07 FLSTS/FLSTSC will require the use of a Rear Mounting Bracket sold separately **Note: To ensure…
Mustang Extra Wide Regal Duke Pillow Seat
$323.99 - $341.99 You save up to $37.01 (9%)
(1)
…the front and rear of the Regal Duke gives this Extra Wide Pillow seat added comfort. Split foam construction on a single baseplate maximizes the driver back support and keeps the passenger from sliding forward.Well padded vinyl cover Made in the USA 00-06 models require rear seat mounting bracket
Kuryakyn Stealth Passenger Armrests
$212.49 You save $37.50 (15%)
(0)
Kuryakyn Stealth Passenger Armrests Ultimate comfort & convenience in a compact, sturdy package! Support brackets are nearly invisible & fastened between Tour-Pak lid & pad. Each arm has two mounting locations & pivot has an adjustable stop for fine tuning pad position. Padded over-molded arm folds…
Jardine Fixed Billet Backrest Kit
$237.19 You save $51.76 (17%)
(0)
Jardine Fixed Billet Backrest Kit Mounting kit for billet backrests Tall backrest included Extends 8 1/4 in. on top of original side brackets (remove OEM top cap) Note: Billet extension that requires use of stock backrest on the following bikes 88-91 Suzuki VS750 Intruder 92-04 Suzuki VS800 Intruder…
Kuryakyn Passenger Armrests
$254.99 You save $45.00 (15%)
(0)
…more comfortable on the back of a GoldWing, but these Passenger Armrests prove that it's possible! The shapely chrome mounting brackets fasten to the trunk & provide a sturdy mount for the swing-away armrests. The top quality padding matches the OEM texture & color for 100% factory look. Kuryakyn…
Show Chrome Armrest Backrest Combo
$296.99 You save $32.96 (9%)
(0)
Show Chrome Armrest/Backrest Combo Armrest/Backrest Combo incorporates a smaller contoured driver backrest using materials and designs to match the OEM look. A new design innovation is the sleek single mounting bracket which allows for easier installation of both the backrest and the armrests.
Mustang Fender Mount Seat Bracket
$18.99 You save $1.96 (9%)
(0)
Mustang Fender Mount Seat Bracket Mounts Mustang Regal Touring seats to '77 and earlier FLH models without a handrail Seats for '78 and later FLH models mount to the stock handrail bracket Made in the USA
Mustang Studded-Style Thin Rear Seat
$140.99 - $149.99 You save up to $15.96 (9%)
(0)
Mustang Studded-Style Thin Rear Seat Matches Mustang's Studded Solo seat Top covering of highest-quality expanded vinyl 6 in. wide Made in the U.S.A. NOTE: 00-07 FLSTS/FLSTSC models require the use of a rear mounting bracket (sold separately) Click Here for Rear-Seat Mounting Bracket
…has sculpted their seat with a super narrow profile and constructed it with just the right amount of molded closed-cell foam padding to make it comfortable for all-day assaults on hot tarmac. The pan is fabricated from vacuum-formed ABS plastic, and features a clean metal bracket on the rear for…
…has sculpted their seat with a super narrow profile and constructed it with just the right amount of molded closed-cell foam padding to make it comfortable for all-day assaults on hot tarmac. The pan is fabricated from vacuum-formed ABS plastic, and features a clean metal bracket on the rear for…
…Vinyl cover is glued and stapled to pan. Mounts to motorcycle with laser-cut steel brackets on nose and tail. Acorn nut, fender washer and 5/16-18 hex bolt for mounting included. Foam padding tapers from 2.5" to 1.5". Installation details: Rear bracket requires drilling one hole into the fender…
…Vinyl cover is glued and stapled to pan. Mounts to motorcycle with laser-cut steel brackets on nose and tail. Acorn nut, fender washer and 5/16-18 hex bolt for mounting included. Foam padding tapers from 2.5" to 1.5". Installation details: Rear bracket requires drilling one hole into the fender…
…roll. Vinyl cover is glued and stapled to pan. Mounts to motorcycle with laser-cut steel brackets on nose and tail. Acorn nut, fender washer and 5/16-18 hex bolt for mounting included. Foam tapers from 2.5" to 1.5". Installation details: Rear bracket requires drilling one hole into the fender for…
…Vinyl cover is glued and stapled to pan. Mounts to motorcycle with laser-cut steel brackets on nose and tail. Acorn nut, fender washer and 5/16-18 hex bolt for mounting included. Foam padding tapers from 2.5" to 1.5". Installation details: Rear bracket requires drilling one hole into the fender…
Drag Specialties Seat Rear Mounting Bracket Bracket can be used with new- and old-style fender nuts Can be used on all motorcycles with the mount-nut and E-clip-style on 1997 and later H-D models Comes with a plastic step washer that reduces the hole to a 1/4" i.d. for early models with factory weld…
Roland Sands Design Enzo Vinyl Solo Seat
$368.99 - $377.99 You save up to $41.96 (9%)
(0)
…out Black distressed vinyl construction Shaped foam center part line adds an extra level of comfort on long rides, while keeping it classic Ergonomic shape keeps rider seated firmly and comfortably Use PART #0820-0047 seat bracket to mount RSD Dyna solo seats to 06-13 FXDF models Made in the U.S.A.
…sew lines and raised perforated diamond pattern coupled with a unique distressed vinyl add an extra level of comfort on long rides, while keeping it classic Ergonomic shape keeps rider seated firmly and comfortably Use PART #0820-0047 seat bracket to mount RSD Dyna solo seats to 06-13 FXDF models
Back to Top