1. Plate Light

Kuryakyn LED Lighted Curved License Plate Frame
$107.99 You save $12.00 (10%)
(1)
Kuryakyn LED Lighted Curved License Plate Frame Here's a great Curved License Plate Frame. It includes a chrome backing plate & outer frame with built-in L.E.D.'s to illuminate the license plate. It's a great way to relocate a license plate below the taillight! Sold each Chrome finish
Kuryakyn LED License Plate Bolt Lights
$17.99 You save $2.00 (10%)
(2)
…LED License Plate Bolt Lights Light up your license plate whether it's in the stock location or custom mounted with these white L.E.D. bolt lights. You won't find a cleaner license plate lighting option with a simpler installation. Sold in pairs **Note: License plate bolt lights have a 1/4"-20…
Targa Incandescent License Lamp This bright light is enclosed in a machined aluminum housing with a 6mm threaded stud allowing it to be mounted to the license plate hole with no drilling It will light a license plate no matter where the plate is mounted (stock location or undertail, rear axle mount…
Kuryakyn LED License Plate Bolt Illuminators
$26.99 You save $3.00 (10%)
(1)
Kuryakyn LED License Plate Bolt Illuminators Each License Plate Illuminator has two L.E.D.'s. The white L.E.D. lights up the license plate & the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 1/4"- 20 mounting stud makes it…
Kuryakyn Lighted Mirror Stem Cover Add some auxiliary lighting to your handlebars easily with Kuryakyn's new Lighted Mirror Stem Covers. Amber L.E.D.'s provide run & turn function. Chrome plated housings clamp securely to stock mirror stems & simple plug-&-play wiring adapters make connections a…
Kuryakyn Lighted Curved Vertical Side Mount
$116.99 - $143.99 You save up to $16.00 (10%)
(0)
Kuryakyn Lighted Curved Vertical Side Mount The frame is grooved, beautifully chrome-plated & features flush-mount flat-head screws & a built-in L.E.D. light assembly to properly illuminate your license plate. Easy installation Chrome plated Sold each **Note: Mount clamps are required for…
Acerbis LED Taillight
$39.99 You save $9.96 (19%)
(7)
…under the rear fender of virtually every offroad motorcycle. Small exclusive universal number plate holder for offroad 2 and 4-stroke motorcycles with characteristic position spotlight and brake light using LEDs. Features: Very low energy consumption so that the engine power is not reduced…
Radiantz License Plate Light 3 7/8” billet chrome 6 white L.E.D.s (5” spacing) Bolts easily onto license plate or license plate holder Eliminate plate illumination problems on sidemount motorcycle license plates 3.80”L x .375”H x .450”D
Bully Billet Steel Alarm Disc Lock
$63.99 You save $7.96 (11%)
(16)
…8mm hardened steel pin Anti-pick lock Movement sensor integrated right into the lock Electronics sealed against moisture Key hole cover protects against dust and dirt Lighted key to assist you at night Nylon protective carry bag included Beautifully plated and polished finish Drill and saw resistant
Kuryakyn Curved Fender Tip License Plate Mount
$161.99 You save $18.00 (10%)
(0)
Kuryakyn Curved Fender Tip License Plate Mount This very classy curved license plate mount hugs the contour of the fender and replaces the existing fender tip. This base plate design incorporates a stylized tip, red L.E.D. lights and a light to illuminate the plate itself while cleaning up the…
Closeout 13% off
Kuryakyn L.E.D. License Plate Frame With Tri-Light Now you can add additional lighting & hide that ugly stock license plate mount at the same time. This great looking curved frame features a white L.E.D. license plate light & three red strip lights with running & brake functions all wrapped in a…
Baja Designs LED Taillight
$58.99 You save $5.96 (9%)
(3)
Baja Designs LED Taillight Very bright (19 L.E.D.) taillight with running light, brake light and built in license plate light Fully E11 approved for the street No bulbs to ever replace Lightweight, waterproof and vibration proof design make it the ideal taillight for offroad motorcycles, dual sport…
…finishing it off with a custom and clean look. Insert looks great and attaches in seconds with our super thin, automotive quality, peel-off adhesive tape Features full CNC-machining and engraving; plate thickness is 3/16" (5mm) Also available in Flamed or Finned themed styles Made in the U.S.A.
…Dynamics Universal Light Bars The all-in-one LED light bar has arrived with brake/running lights and turn signal in one LED strip!. Install this on fenders, license plate frames, saddle bag....the only limit to you options is your imagination and ingenuity. These light bars have dual-intensity,…
Kuryakyn Lighted License Plate Frame
$44.99 You save $5.00 (10%)
(1)
Kuryakyn Lighted License Plate Frame This chrome die-cast license plate frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake and tail lamp circuits or together for an extra bright stop or running light. Includes integrated white light for plate
Kuryakyn Turn Signals with Lighted License Plate
$224.99 You save $25.00 (10%)
(1)
…Turn Signals with Lighted License Plate Get ready for the compliments when you stream line the back fender & add that custom classy look to your Road Star. Designed to flow around your stock taillight, this kit fully replaces that stock bulky turn signal & license plate bracket. Includes hardware…
Back to Top