1. Pit Bull Street Motorcycle Stands

Grid List
Pit Bull Spooled Forward Handle Rear Stand The Spooled Forward Handle Rear lifts spool-equipped bikes. It is width adjustable to fit virtually all sport bikes. It is also height adjustable to set clearance under rear wheel. Same as Standard Forward Handle Rear except for interchangeable top…
Pit Bull ZRX/Hayabusa/ZX14R Rear Stand This stand was designed for use with the second generation Hayabusa and Kawasaki ZX14R motorcycles which have not had a fender eliminator kit installed. This stand is also ideal for Kawasaki ZRX motorcycles to give better leverage when lifting than you would…
Pit Bull Triumph Reversible One Armed Rear Stand For Triumphs with single-sided swingarms. When installed on the left side, it allows wheel removal; when installed on the right side, it allows easy sprocket removal. On the left side, handle is forward; on the right side, handle is behind bike. It…
Pit Bull BMW Forklift Front Stand Similar to the Pit Bull Forklift Front, this stand is tailored to fit the 2005 and newer BMW K1200, R1200, and HP2 motorcycles Allows front wheel cleaning and removal. Use only with rear stand
Pit Bull Standard Rear Stand The Standard Rear Stand lifts non-spool equipped bikes by supporting the swingarm with rubber pads. It is width adjustable to fit virtually all sport bikes. Same as Spooled, SS and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports.…
Pit Bull Spooled Rear Stand The Spooled Rear Stand lifts spool-equipped bikes. It is width adjustable to fit virtually all spool-equipped sport bikes. Same as Standard, SS and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports. Specify Narrow for Vintage and…
Pit Bull SS Rear Stand The SS Rear Stand can be used as a Standard or Spooled Rear Stand by flipping the top supports over. It is width adjustable to fit virtually all sport bikes. Same as Spooled, Standard and 999 Rear Stands except for interchangeable top supports. Sold complete with top supports.…
Pit Bull Hybrid Headlift Stand The Hybrid Headlift Stand lifts from steering stem of bike to allow front wheel and fork leg removal. Lifts bike easily and stores compactly 7 levels of height adjustability A 6mm threaded hole on the upper portion of the stand will allow any 6mm bolt to be installed…
Pit Bull Buell 1125R Rear Stand This stand was designed specifically for the 2008 Buell 1125. The swivel supports are designed to ensure the stand does not slide on the swingarm nor do the pegs block access to the pinch bolt.
Pit Bull Ducati Sport Classics Rear Stand The Sport Classic Rear Stand fits the Ducati Paul Smart 1000, GT 1000, and Sport 1000 bikes. This is a new design specifically for the Sport Classic models. **Note: This stand is available exclusively with a removable handle due to its dimensional shipping…
Pit Bull NSR250 One Armed Rear Stand Allows wheel removal for bikes with single-sided swingarms including Honda NSR250. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Sold complete, but pins are interchangeable to fit other bikes
Pit Bull Ducati One Armed Rear Stand The Ducati One Armed Rear allows wheel removal for all Ducatis with single-sided swingarms except those listed in NOTE below. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. **Note: Sold complete,…
Pit Bull BMW F800 One Armed Rear Stand Allows wheel removal for BMW F800 with single-sided swingarm. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling. Right Side Insert Only **Note: R1200 shown in photo. No F800 photos available at…
Pit Bull 240/300 Wide Standard Rear Stand This stand is designed to work underneath certain aftermarket wide tire swingarms designed for 240 and 300 width tires. May not work with some models depending on swingarm design. Width Adjustability: 14-1/4" - 17-1/2".
Back to Top