1. Led Load Equalizer

Grid List
Kuryakyn Alarm Compatible Load Equalizer
$26.99 You save $3.00 (10%)
(0)
Kuryakyn Alarm Compatible Load Equalizer When either a Panacea System or a Run-Turn-Brake Controller is installed on a Late Model H-D equipped with a factory security system (T.S.S.M.) and L.E.D. or low-draw turn signals, the security remains fully functional, This product will not disable the…
Kuryakyn Load Equalizers
$16.99 - $17.99 You save up to $1.00 (5%)
(0)
Kuryakyn Load EqualizersThese load equalizers work great in custom applications where OEM turn signals have been removed & replaced with low draw L.E.D. or small incandescent turn signals. Sold each
…similar lights to L.E.D. Enjoy the low draw and low heat benefits of L.E.D. by simply changing bulbs. Sold each Red or Amber L.E.D's available Large bulbs are MR16 type Small bulbs are MR11 type **Note: Because of the very low amperage drawn on these L.E.D.'s a load equalizer is required **Closeouts…
…overloading existing circuits, it is recommended a wiring and relay be installed when connecting Silver Bullets. **Note: LED auxiliary turn signals are not DOT approved and may require load equalizer. **Note: This light bar is compatible with most windshields, but does not fit with Memphis Fats.
Kuryakyn Plug-In Load Equalizer Adapter
$26.99 You save $3.00 (10%)
(0)
Kuryakyn Plug-In Load Equalizer Adapter This plug-in adapter allows up to two load equalizers to be added to 2010 & later Street Glides & Road Glide Customs when converting from incandescent to L.E.D. or other low-draw turn signals without the need to cut & splice. Sold each Easy installaton
Kuryakyn Bullet LED Front Turn Signal Conversions
$125.99 You save $14.00 (10%)
(1)
…unaffected by the vibrations produced on the average motorcycle. The L.E.D. circuit boards are mounted inside Kuryakyn stylized lenses so all you do is take off your stock lens, remove the bulb, plug Kuryakyn's connector into the socket & install Kuryakyn lens. Includes load equalizer Sold in pairs
…of the motorcycle from the rear Built-in load equalizer works with stock signals and can run the smallest custom signals, even LEDs Comes with easy-to-follow instructions and features plug-in connectors Works with incandescent, halogen and 12V LED signals and markers Made in the U.S.A. **Note:…
Kuryakyn LED Dual Circuit Bulb
$11.99 You save $1.00 (7%)
(2)
…that the bulb face the lens for proper illumination. Not recommended for '99-E '03 taillights or '86-'10 flat lens turn signals found on Dresser, Road King, or Heritage Models. Sold each Replaces 1157 **Note: Because of the very low amperage drawn on these L.E.D.'s a load equalizer is required
Biketronics Tailbones Converter
$62.99 You save $6.96 (9%)
(1)
…converter adds running light and stoplight function to rear turn signals Designed by an electrical engineer who literally "wrote the book" on designing in reliability LED or custom signals can be used Easy plug-in installation American engineered and manufactured Load equalizer not included
…for load equalizers or resistors. Features: Features 12 super bright LEDs 3M double-sided tape for easy mounting 3-wire color coded easy-to-follow electrical installation "Knight Rider" side-to-side sequenced running light. Flashing brake alert Works with any 12V DC system No load equalizers or…
…fender struts creating a clean look. Each kit comes with clear lenses & a set of colored lenses that match the light output. Lenses provide a brighter glow over standard flat lenses. Sold in pairs Chrome finish Easy installation Mounts in rear fender strut hole **Note: Load equalizer not included
…the new deep dish style reflector L.E.D. light kits. May be used to convert Halogen style or older reflector style L.E.D. Silver Bullets to deep dish style reflector L.E.D. with modifications to mounting hardware. If converting from halogen to L.E.D. a load equalizer is required due to the very low…
Kuryakyn LED Single Circuit Bulb
$10.99 You save $1.00 (8%)
(0)
…that the bulb face the lens for proper illumination. Not recommended for '99-E '03 taillights or '86-'10 flat lens turn signals found on Dresser, Road King, or Heritage Models. Sold each Replaces 1156 **Note: Because of the very low amperage drawn on these L.E.D.'s a load equalizer is required
Show Chrome LED Torpedo Lights
$80.99 You save $8.96 (9%)
(1)
…or as marker lights for your cruiser or chopper Amber LED design provides unparalleled visibility and are e-marked approved Can be used with turn signal adapters for 8mm or 3/8" stud mount 3-1/8" long and 1-1/8" diameter Requires Load Equalizer to balance load when converting from incandescent
…highlights 10 LEDs in each housing; can be wired to run as run/turn/brake accent lights Approximately 3/4" of clearance is required behind the surface these are installed into Housings measure 83/8" L x 131/2" W; LEDs measure 51/4" L x 1/2" W Sold in pairs **Note: May require load equalizer or turn…
…highlights 10 LEDs in each housing; can be wired to run as run/turn/brake accent lights Approximately 3/4" of clearance is required behind the surface these are installed into Housings measure 83/8" L x 131/2" W; LEDs measure 51/4" L x 1/2" W Sold in pairs **Note: May require load equalizer or turn…
Back to Top