1. Coil Spring

Grid List
Progressive Suspension 425 Series Shocks
$314.99 You save $33.96 (9%)
…without having to break the bank Available in standard or heavy duty spring rates, the 425 Series features a beefy 16mm shaft and twin tube, high-pressure nitrogen-charged damper All of which is wrapped in a powder-coated coil spring and touch of chrome making for a stylish shock that cleans up…
…powder-coated, progressive-rate steel coil spring The dampers feature a nitrogen charge that eliminates cavitation and creates a consistent ride performance with no fading The 422 series is a fully adjustable Softail shock, with adjustable ride height and spring pre-load The shocks are impressive…
Barnett Scorpion Billet Clutch
$494.99 - $495.99 You save up to $54.01 (9%)
(1)
coil springs instead of a diaphragm spring to handle increased horsepower Friction plates are compatible with any primary oil No machining necessary for installation; bolt it on using the original clutch shell Kits include clutch hub, drive plates, , driven platestwo sets of clutch springs, pressure…
…422 Series Premium Shocks Fully adjustable for ride height and spring preload Makes tuning the bike's suspension for the rider and his or her riding style easy Shocks feature a show chrome cover Pair of progressive-rate coil springs and purpose-designed monotube dampers provide superior suspension…
Progressive Suspension Air Dragger Shocks
$449.99 You save $49.96 (9%)
…Air Dragger™ Shocks By combining a machined aluminum air chamber, velocity sensitive, multi-stage valving and an internal progressive rate coil spring, Progressive Suspension once again has elevated air suspension to a new level. The clean and simple, full chrome body mounts to all late model…
S&S Cycle 570G Grind Cams For 88/96//103 cubic-inch engines Compression ratios below 10:1 99-04 models require high-lift springs **Note: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearanc Due to the inherent characteristics of gear drives, you may experience more…
Burly Stiletto Shocks
$275.99 You save $23.96 (7%)
…Shocks The new Burly Stiletto shocks are 15" of coil sprung sexiness. Created to give your Sportster the attitude and suspension travel that a proper Cafe, Scrambler or post-apocalyptic XL needs. The high performance damper is wrapped in a spring combination designed specifically to deal with subtle…
…the 2,800-6,500 rpm range Uses stock springs Intake: Opens: 31 degrees Closes: 55 degrees Duration @ .053: 266 degrees Valve Lift: .560 Exhaust: Opens: 51 degrees Closes: 27 degrees Duration @ .053: 266 degress Valve Lift: .560 Note: Must check coil bind, valve-to-valve clearance and valve-to-piston…
…stock spring travel set to .560” minimum Excellent power in the 2,500-6,500 rpm range Intake: Opens: 28 degrees Closes: 44 degrees Duration @ .053: 252 degrees Valve Lift: .530 Exhaust: Opens: 52 degrees Closes: 20 degrees Duration @ .053: 252 degress Valve Lift: .530 Note: Must check coil
…seals, valve guides and spring kits. Cams are sold in sets of two, one intake and one exhaust cam. Strong mid-range torque with great upper end power Best for modified engines with 10.5:1 compression ratio, big bore kits and modified heads Must use Crane valve springs, set up for .700” travel,…
…temperature Uses stock springs; works with carbs or fuel injection Intake: Opens: 15 degrees Closes: 31 degrees Duration @ .053: 226 degrees Valve Lift: .485 Exhaust: Opens: 45 degrees Closes: 13 degrees Duration @ .053: 238 degress Valve Lift: .495 Note: Must check coil bind, valve-to-valve…
…6,000+ rpm cam for stock heads and springs with hydraulic lifters Intake: Opens: 21 degrees Closes: 37 degrees Duration @ .053: 238 degrees Valve Lift: .495 Exhaust: Opens:43 degrees Closes: 15 degrees Duration @ .053: 238 degress Valve Lift: .495 Note: Must check coil bind, valve-to-valve clearance…
…use with high lift springs and collars Very broad powerband to 6,000 rpm Intake: Opens: 28 degrees Closes: 48 degrees Duration @ .053: 256 degrees Valve Lift: .560 Exhaust: Opens: 56 degrees Closes: 24 degrees Duration @ .053: 260 degress Valve Lift: .560 Note: Must check coil bind, valve-to-valve…
…cam is installed. These hydraulic lifter cams are capable of 6,000-plus rpm with stock springs and no valve float. Made in the U.S.A. Upgraded EV7, for 92” or larger street motors For use with Andrews springs and titanium collars Very broad powerband, 2,800-6,000 rpm OK for use with hydraulic…
…a superior Andrews computer-designed high-performance cam is installed. These hydraulic lifter cams are capable of 6,000-plus rpm with stock springs and no valve float. Made in the U.S.A. Lower lift exhaust for easy installation Bolt-in for lighter bikes (FXLR, etc.) Great mid-range and high-end…
…a superior Andrews computer-designed high-performance cam is installed. These hydraulic lifter cams are capable of 6,000-plus rpm with stock springs and no valve float. Made in the U.S.A. Super power for supercharged engines Has a timing set for superchargers or big inch motors with 10.5+…
…a superior Andrews computer-designed high-performance cam is installed. These hydraulic lifter cams are capable of 6,000-plus rpm with stock springs and no valve float. Made in the U.S.A. Bolt-in performance cam with fast open and close ramps Similar to "EV3" but higher static compression pressure…
…when a superior Andrews computer-designed high-performance cam is installed. These hydraulic lifter cams are capable of 6,000-plus rpm with stock springs and no valve float. Made in the U.S.A. Long duration for modified street motors Works with stock hydraulics Easy installation Power range from…
…altitudes Uses stock springs; works with carbs or fuel injection Intake: Opens: 10 degrees Closes: 30 degrees Duration @ .053: 220 degrees Valve Lift: .498 Exhaust: Opens: 40 degrees Closes: 8 degrees Duration @ .053: 228 degress Valve Lift: .498 Note: Must check coil bind, valve-to-valve clearance…
…low-restriction exhausts (1700-5200 rpm) Similar to the EV-23 cam Cams work well with fuel injection or carburetor models Can be used with stock valve springs and tappets Works well with carbs or fuel injection Intake: Open: 10 degrees Close: 30 degrees Duration at .053: 220 degrees Duration at .020…
…cams are installed. Bolt-in cam for lower rpm torque on heavier bikes For two-up touring Good power from 1800-5500 rpm Can be used with stock springs and tappets Works well with carbs or fuel injection Intake: Open: 11 degrees Close: 35 degrees Duration at .053: 226 degrees Duration at .020 valve…
Back to Top