1. Chrome Lower Forks

Grid List
Kuryakyn Upper Fork Slider Cover
$116.99 You save $13.00 (%)
…stainless fork slider covers with chrome ones. Kuryakyn's new Upper Fork Slider Covers provide the same shimmering chrome finish, but install in only minutes over the stock covers - no need to disassemble the front end! Want to really look sharp? Use these along with Kuryakyn's Chrome Lower Leg…
Biker's Choice Chrome Springer Forks
$626.99 You save $68.96 (9%)
…black powder-coated finish How To Measure For Springer Front Ends Measure the fork currently on your bike All measurements should be taken from the lower stem bearing cup to the center of the axle If stock front forks measure: 19"- 21" = 2" under 21"- 23" = Stock 23"- 25" = +2" over 25"- 27" = +4"…
Kuryakyn Lower Fork Skins
$71.99 - $125.99 You save up to $14.00 (%)
Kuryakyn Lower Fork Skins Nothing gets noticed like a nice front end, so create a shining first impression! Kuryakyn Lower Fork Skins are sleek, stylized covers that apply a glistening layer of chrome to your plain stock fork sliders. Sold as pairs Easy installation Made in the U.S.A. **Note:…
Kuryakyn Lower Leg Deflector Shield
$71.99 You save $8.00 (%)
(2)
Kuryakyn Lower Leg Deflector Shield Thanks to Kuryakyn these chrome accents not only look good but also protect the factory lower fork legs. Easy to install, no tools required Chrome finish Sold in pairs **Closeouts are limited to stock on hand**
Biker's Choice Black Springer Forks
$626.99 You save $68.96 (9%)
…1" steering stem bearings Also available with chrome finish How To Measure For Springer Front Ends Measure the fork currently on your bike All measurements should be taken from the lower stem bearing cup to the center of the axle If stock front forks measure: 19"- 21" = 2" under 21"- 23" = Stock…
Burly Fork Lowering Kit
$134.99 You save $14.96 (9%)
Burly Fork Lowering Kit The quickest and easiest way to lower front forks by 1-1/2" Comes with two chrome compression springs, spring spacers and bushings Requires Burly's disassembly tool to install Made in the U.S.A.
Kuryakyn Fork Braces
$143.99 You save $16.00 (%)
(1)
Kuryakyn Fork Braces Kuryakyn's Fork Braces are made of high-quality, chrome-plated, die-cast aluminum fork braces Clamps to the lower fork leg below the dust cap Total adjustability prevents binding that may occur with one-piece fork braces
Arlen Ness Fork Boot Covers Replaces OEM lower fork leg covers Machined from forged 6061 T-6 billet aluminum Available in chrome, black anodize and black anodize with diamond cut edges Deep cut available in chrome or black anodized finish Sold in pairs
Kuryakyn Triple Tree Cover Sets
$53.99 You save $6.00 (%)
(2)
…VTX. This kit provides the look of a custom chrome replacement triple tree set at a fraction of the cost & with significantly less work! The 5-piece set includes a one-piece cover for the top triple clamp, chrome fork tube caps, & covers for the lower triple clamp for the VTX1800C only (see multi…
Kuryakyn Brake Line Clip Cover
$35.99 You save $4.00 (%)
Kuryakyn Brake Line Clip Cover Cover those bare stamped brackets holding your front brake lines to the forks with some blood grooved chrome. These little beauties really make a difference & clean up the lower front fork area. A snap to install Sold in pairs Made in the U.S.A.
Kuryakyn Fork Mounted Driving Lights
$314.99 You save $35.00 (%)
Kuryakyn Fork Mounted Driving Lights Here's a slick way to add auxiliary lighting to the front of your bike! Kuryakyn's sturdy investment cast brackets mount securely to the front fender bosses on your lower legs & neatly mount Kuryakyn's sleek 3" diameter driving lights. The mounts allow for easy…
National Cycle Switchblade Mount Kit
$78.99 - $141.99 You save up to $14.96 (9%)
(21)
…and chromed steel hardware Innovative Cushion Wheel spools turn and flex, allowing the shield to lock into place with a reassuring "pop". Want to remove or change the shield? A gentle tug is all that is needed Works with all Switchblade Windshields and Chrome Lowers Spec 1: for exposed forks Spec…
Burly Slammer Kit
$155.99 - $305.99 You save up to $33.96 (9%)
(2)
Burly Slammer Kit Complete lowering kit in one box with springs and shocks (unless noted) Easy to install fork springs that do not require the removal of forks Drop-in fork springs lower front end up to 2" Shocks lower rear up to 2-1/2" Made in the U.S.A. **Note: FXST and FLST do NOT include rear…
…Cap Spun Blade axle caps feature spinning blades that give the illusion of flight Blades start to spin at approximately 25mph Chrome ABS construction Simple bolt-on installation Sold in pairs **Note:Will not install with Kuryakyn lower fork skins. **Closeouts are limited to stock on hand**
…for aftermarket hand controls or custom applications, and Dimpled for stock Harley-Davidson switches and levers. Fitment: Mustache Bars are both lower and narrower than most stock handlebars, a feat that makes them perfect for guys who want to reduce the lane-splitting profile of their machine. The…
Kuryakyn LED Front Reflector Conversion Replace the ho-hum amber reflectors on your lower forks with an array of amber L.E.D.'s! Both running lights & turn signals for an added measure of visibility. Chrome finish Sold in pairs Easy installation **Note: '06-'12 GL1800's require Kuryakyn's Adapter…
Kuryakyn Zombie Spun Blade Spinning Axle Cap Spun blade axle caps feature spinning blades that give the illusion of flight Blades start to spin at approximately 25mph Chrome ABS construction Simple bolt-on installation Sold in pairs **Note: Will not install with Kuryakyn lower fork skins
Back to Top