1. Chrome Fork Covers

Grid List
Fork Skins A chromed front-end at a fraction of the cost! Add up the related costs of actual plating, new seals, new fork oil, axle caps, chrome hardware, labor, and (to keep this comparison accurate) a chrome fork brace, the final bill is realistically around $550. Kuryakyn's Fork Skins will chrome
Kuryakyn Lower Leg Deflector Shield
$67.99 You save $12.00 (15%)
(3)
Kuryakyn Lower Leg Deflector Shield Thanks to Kuryakyn these chrome accents not only look good but also protect the factory lower fork legs. Easy to install, no tools required Chrome finish Sold in pairs **Closeouts are limited to stock on hand**
Kuryakyn Spun Blade Spinning Axle Cap
$84.99 You save $15.00 (15%)
(2)
…Cap Spun Blade axle caps feature spinning blades that give the illusion of flight Blades start to spin at approximately 25mph Chrome ABS construction Simple bolt-on installation Sold in pairs **Note:Will not install with Kuryakyn lower fork skins. **Closeouts are limited to stock on hand**
Performance Machine Merc Fork Slider Covers
$269.99 You save $29.96 (9%)
(0)
Performance Machine Merc Fork Slider Covers Machined from billet aluminum Available in chrome, Contrast Cut or Black Ops finish Contrast Cut finish starts with a slider cover that has been black anodized, then recut to open up the design Black Ops finish features a gloss black on top of a…
Kuryakyn Lower Fork Covers
$127.49 You save $22.50 (15%)
(0)
…Lower Fork Covers Transform you stock forks from ordinary to extraordinary! The ABS protective deflector and the stamped metal cover provide an amazing smooth and stylish design to help your bike standout from the crowd.  The Lower Fork Covers install directly over the plain lower fork casting…
Kuryakyn Lower Fork Skins
$118.99 You save $21.00 (15%)
(0)
…Kuryakyn Lower Fork Skins are sleek, stylized covers that apply a glistening layer of chrome to your plain stock fork sliders. Sold as pairs Easy installation Made in the U.S.A. **Note: Product may vary depending on model. **Note: VTX1300 R/S/T models do not include upper cover above fender mount…
Arlen Ness Fork Boot Covers
$229.95 - $299.95
(0)
Arlen Ness Fork Boot Covers Replaces OEM lower fork leg covers Machined from forged 6061 T-6 billet aluminum Available in chrome, black anodize and black anodize with diamond cut edges Deep cut available in chrome or black anodized finish Sold in pairs
Covington's Customs Fork Bellows CNC machined from billet aluminum Sold in pairs Made in the U.S.A. Available in black or chrome NOTE: When installing on FLST models or other models with a custom front fender, check fender clearance before operating the motorcycle.
Kuryakyn Upper Fork Shrouds
$135.99 You save $24.00 (15%)
(0)
Kuryakyn Upper Fork Shrouds Add some style to your stock forks without the need to disassemble them! These beauties will truly transform the look of your front end. Especially when combined with Küryakyn's Lower Fork Covers. Peel-and-stick installation provides easy removal and re-installation if…
Kuryakyn Front Axle Nut Covers
$21.24 - $25.49 You save up to $4.50 (15%)
(2)
Kuryakyn Front Axle Nut Covers Blend nicely with the OEM front forks Fit close to the fork sliders so there are no unsightly gaps Chrome finish Sold in pairs **Note: 91-03 Dyna models require use of 39mm forks
Kuryakyn Triple Tree Cover Sets
$50.99 You save $9.00 (15%)
(2)
Cover Sets This is the ultimate front end dress-up kit for the VTX. This kit provides the look of a custom chrome replacement triple tree set at a fraction of the cost & with significantly less work! The 5-piece set includes a one-piece cover for the top triple clamp, chrome fork tube caps, & covers
Kuryakyn Upper Fork Slider Cover
$110.49 You save $19.50 (15%)
(0)
Fork Slider Cover You'd be amazed at the amount of time, materials & labor required to simply replace the stock stainless fork slider covers with chrome ones. Kuryakyn's new Upper Fork Slider Covers provide the same shimmering chrome finish, but install in only minutes over the stock covers - no…
National Cycle Switchblade Mount Kit
$78.99 - $141.99 You save up to $14.96 (9%)
(22)
…Innovative Cushion Wheel spools turn and flex, allowing the shield to lock into place with a reassuring "pop". Want to remove or change the shield? A gentle tug is all that is needed Works with all Switchblade Windshields and Chrome Lowers Spec 1: for exposed forks Spec 2/3: for covered forks
Show Chrome Lighted Front Rotor Covers
$269.99 You save $29.96 (9%)
(0)
Show Chrome Lighted Front Rotor CoversRotor Covers with a circle of tri-color LED lights on the outer edge (amber points outward, red and blue points inward). There are 38 LEDs in outer ring edge on each side, and also a 9 amber LED light at the bottom of the fork for added side visibility. The…
Performance Machine Slash Fork Slider Covers
$269.99 You save $29.96 (9%)
(0)
Performance Machine Slash Fork Slider Covers Machined from billet aluminum Available in chrome, Contrast Cut or Black Ops finish Contrast Cut finish starts with a slider cover that has been black anodized, then recut to open up the design Black Ops finish features a gloss black on top of a…
Kuryakyn Nacelle Accent
$110.49 You save $19.50 (15%)
(0)
…Accent Forget about run-of-the-mill gauge bezels...this kit totally transforms the appearance of the Road Glide speedometer, tach and fork nacelle The main cover envelops the gauges and indicator lights with an elegantly sculpted shroud while the four individual accent pieces decorate the edges of…
Back to Top