1. Cam Chain

Grid List
Wiseco Cam Chain
$42.99 - $75.79 You save up to $9.16 (10%)
(0)
Wiseco Cam Chain Made from premium materials to reduce friction and increase service life “M” style chain gives you maximum strength and durability Wiseco’s in-house engineering ensures its cam chains exceeds OEM specifications and tolerances
Pro X Racing Parts Cam Chain
$49.95 - $84.95
(0)
Pro X Racing Parts Cam Chain Manufactured in Japan by Borg Warner Designed to O.E.M. specifications Strong M-Type chain which has special heat treated pins plus advanced pin and link connections for maximum performance and durability
DID Silent Cam Chain
$67.99 You save $16.96 (19%)
(0)
DID Silent Cam Chain Special Dai-hard™ treatment forms an extremely hard metallic layer on the pin surface for increased durability Unique pin-link plate set-up offers an ideal engaging mechanism for smooth, low-friction power High tolerance protects against power loss
Crane Cams Chain Drive 304-2 Max Hot Street Cam Computer-designed hydraulic cams are available from mild street/cruising up to big-bore and race engine build-ups and feature lobe-to-lobe cam profile accuracy for off-idle torque and high-rpm horsepower. Cams for 06 Dyna and all 07-09 models require…
…Cycle Super Stock cylinder heads allows the use of camshafts designed for the stock style chain cam drive system. However, for maximum reliability and performance we recommend the S&S Cycle gear drive cams. S&S Cycle cylinder heads with 79cc and 89cc chambers use different valve sizes so it is…
Kuryakyn Chrome Timing Chain Cover Set If your eyes hurt from looking at the ugly aluminum cam chain cover but you don't want the expense & hassle of having the cover chromed, you're in luck. Kuryakyn's chrome set covers the entire timing chain cover in minutes. Just peel-&-stick! The strong…
Kolpin Saw Press II Bracket
$72.99 You save $7.50 (9%)
(2)
…Yet it provides quick and easy access to get the job done. Tough rubber pads provide a cushion for the powerhead and protects the chainsaw bar and chain during transport. The Saw Press II mount is fully adjustable, mounting up or down and angling up to 45 degrees in either direction for easy access…
Crane Cams Chain Drive 300-2 Mild Street Cam Computer-designed hydraulic cams are available from mild street/cruising up to big-bore and race engine build-ups and feature lobe-to-lobe cam profile accuracy for off-idle torque and high-rpm horsepower. Cams for 06 Dyna and all 07-09 models require the…
Crane Cams Chain Drive 296-2 Hot Street Cam Computer-designed hydraulic cams are available from mild street/cruising up to big-bore and race engine build-ups and feature lobe-to-lobe cam profile accuracy for off-idle torque and high-rpm horsepower. Cams for 06 Dyna and all 07-09 models require the…
Crane Cams Chain Drive 310-2 Moderate Street Cam Computer-designed hydraulic cams are available from mild street/cruising up to big-bore and race engine build-ups and feature lobe-to-lobe cam profile accuracy for off-idle torque and high-rpm horsepower. Cams for 06 Dyna and all 07-09 models require…
Crane Cams Chain Drive 316-2 Street Performance Cam Computer-designed hydraulic cams are available from mild street/cruising up to big-bore and race engine build-ups and feature lobe-to-lobe cam profile accuracy for off-idle torque and high-rpm horsepower. Cams for 06 Dyna and all 07-09 models…
…CONVERSION CAM PLATE is for 99-06 Twin Cam, except 06 Dyna, has the original style 99-06 Twin Cam cam bearing bores for use with the press in bearings. Cam plate is designed to use the new style 07-14 factory hydraulic chain tensioner system with the original 99-06 Twin Cam® style camshafts.…
…Duration at .020 valve lift: .266 Valve lift: .490 Lift at TDC: .120 **Note: 00-06 model cams use a splined cam drive sprocket Cams will fit in the 1999 Twin Cam motor, but the OEM splined cam drive sprocket must be used Installer must check coil bind, valve-to-valve clearance and valve-to-piston…
…Duration at .020 valve lift: .264 Valve lift: .498 Lift at TDC: .121 **Note: 00-06 model cams use a splined cam drive sprocket Cams will fit in the 1999 Twin Cam motor, but the OEM splined cam drive sprocket must be used Installer must check coil bind, valve-to-valve clearance and valve-to-piston…
Feuling OE+ Cam Plates for Gear or Chain Drive Cams FEULING® OE+ stock replacement billet cam plates are manufactured from 6061 aluminum providing increased rigidity and machined to FEULINGs® high tolerance standards Pressure relief valve and spring are pre-set, matched and seated by FEULING® with a…
chain drive version. To get the best performance from a performance cam installation, a high flow intake and exhaust system is also recommended. Designed for engines with 96 to 106 CID and 9:1 to 9:9 compression this is a bolt-in cam set designed for stock or mildly modified touring bikes. 551 cams
S&S Cycle 570 Grind Easy Start Cam S&S .570 inch lift cams are designed for 88 to 96 inch engines with compression ratios between 9:1 and 10:1.  This 570CE Chain Drive Easy Start cam is designed to increase performance at an affordable price and Easy Start Cams allow stock starter to start any…
…Start cams for the Tri Glide. The short duration produces lots of torque, and the automatic mechanical compression release makes the engine a snap to start! Stock cam base circle allows use of stock pushrods, but we recommend the S&S Quickee pushrods for easy installation. Available in chain drive…
S&S Cycle 475G Grind Cams   Designed as a bolt in stock replacement cam for rides with stock 1999-06 engines who are not looking for more power, but want to eliminate the stock cam drive chains.
Back to Top