1. Cruiser Motorcycle
  2. Parts
  3. Fuel Systems

1989 Harley-Davidson Electra Glide Sport - FLHS Fuel Systems

Select Your RideGo

Narrow Your Results
Reset
Grid List
Mikuni
HSR42 Carburetor
$375.00
$338.09
You save $36.91 (10%)
(0)
Mikuni HSR42 Carburetor For the high-performance engine builder who needs a carb for specific custom applications Available in standard or highly-polished finishes **Note: Some models many need use a
S&S Cycle Super "E" Master Rebuild Kit Carburetor master rebuild kit. Fits Super E gas carbs for Harley-Davidson motorcycles. Includes a body rebuild kit all new fasteners, springs, idle mixture screw
Moose Racing Carburetor Vent Line This quality made fuel line will not harden or crack Available in 1/8" i.d. Carb vent line comes in 5-foot lengths Choice of clear or black
Drag Specialties Black Braided Hose Hose features a black nylon braided covering Suitable for either gas or oil applications Available in various sizes and lengths 1/2" hose is for o
Moose Racing Fuel Line This quality made fuel line will not harden or crack Available in 1/4", 3/16", and 5/16" i.d. Fuel line available in 3-foot lengths Choice of clear or black
Motion Pro
Premium 3 Ft. Fuel Line
$17.95 - $22.95
$15.99 - $19.99
You save up to $2.96 (13%)
(2)
Motion Pro Premium Fuel Line Stronger and more durable than vinyl fuel line Use with any type of gasoline Resists swelling and hardening Resistant to direct sunlight, hardening and/or
Motion Pro
Y Connector 10-Pack
$2.50 - $29.50
$2.50 - $19.99
You save up to $9.51 (32%)
(0)
Motion Pro Y Connector 10-Pack White steel resistant plastic (Acetal) Used to run two hoses into one May be used with hose clamps or O-clips Fuel-resistant Sold in packs of 10
Mikuni
Carburetor Mounting Flange
$23.95 - $24.95
$21.99 - $22.99
You save up to $1.96 (8%)
(0)
Mikuni Carburetor Mounting Flange Genuine Mikuni Carburetor Mounting Flange that adapts your cruiser motorcycle, ATV, dirt bike, or street bikes spigot (sleeve) mount carb to flange mount manifolds.
Motion Pro
Fuel Line Fittings Kit
$371.95
$316.99
You save $54.96 (15%)
(0)
Motion Pro Fuel Line Fittings Kit Contains the parts needed to service any fuel line routing Includes 40 assorted O-clips, 40 assorted Y-connectors, 40 assorted T-connectors, hose clamps and a pair o
Mikuni
HSR42 "Smoothbore" Carburetor Kit
$598.95
$539.99
You save $58.96 (10%)
(0)
Mikuni HSR42 "Smoothbore" Carburetor Kit Kits include the redesigned 42mm smoothbore carb in a natural finish Easier, faster installation using stock CV throttle cables Excellent thrott
Mikuni
HSR45 "Smoothbore" Carburetor Kit
$678.95
$611.99
You save $66.96 (10%)
(1)
Mikuni HSR45 "Smoothbore" Carburetor Kit Kits include the redesigned 45mm smoothbore carb in a natural finish Easier, faster installation using stock CV throttle cables Excellent throttle response,
Dynojet
Stage 7 Thunderslide with Jet Kit
$164.95
$148.99
You save $15.96 (10%)
(0)
Dynojet Stage 7 Thunderslide with Jet Kit Stage 7 kits are for 80 plus horsepower engines and include a taller carburetor top for more slide movement Revolutionary composite plastic slide pr
Motion Pro
Stepless Ear Clamps
$8.49
$7.99
You save $0.50 (6%)
(0)
Motion Pro Stepless Ear Clamps Fuel line fittings for your motorcycle fuel system.Small fits braided fuel line with 3/16" I.D. Large fits braided fuel line with 5/16" I.D.
S&S Cycle Super "E" Carburetor The Super "E" is a butterfly type carb with fully adjustable idle mixture screws and changeable intermediate and main jets. The idle mixture screw is positioned and an
S&S Cycle Super "G" Carburetor The Super "G" carburetor has a 2-1/16" Throat at the butterfly and a 1-3/4" venturi and is recommended for use on 90-cubic-inch and larger high-performance and modifie
Motion Pro T-Connector 10-Pack White steel resistant plastic (Acetal) Used to run two hoses into one May be used with hose clamps or O-clips Fuel-resistant Sold in packs of 10

Latest Reviews

Erik (Rohnert park, CA)

Fit
Finish
Durability
Features
Cost Benefit

PC111 is a must!!!

I have a 03 Honda 919 with a K&N filter and Yoshi dual exhaust. What a difference this made. It made my throttle sooo much smoother. The bike runs so much better. I love it. Thanks Motorcycle Superstore.

Aaron (Concord, NH)

Fit
Finish
Durability
Features
Cost Benefit

PCV on a FZ8

2011 FZ8 with a Yoshimura slip on required a tune to help with flat spots and some hesitation on decel. Looked at several options and picked the dynojet. Downloaded map helped with acceleration and smoothness. Overall the bike performs and rides better. Curious why air filter mods are not figured into the stock maps. Motorcycle Superstore was easy to use, true to their word and showed up on time.

adam (st. louis, MO)

Fit
Finish
Durability
Features
Cost Benefit

good product

I got this jet kit to rejet when I got my HMF exhaust. This is a good kit, it helped give more power when I put my exhaust on. Installation was really easy and I have never re-jetted a quad before. Overall I think it is a good kit.

Jeff S (Gardner, KS)

Fit
Quality
Installation
Recommend

Works great

I had put on Slash Mufflers on my Dyna, it started to decel pop pretty bad. I then installed the FP3 and it runs so much better and even has better throttle response.

Ross (Cleveland, OH)

Fit
Quality
Installation
Recommend

Cobra Fi2000r fuel processor

Product came as described. Install went smoothly. Bike ran better after install but then I put cobra speedster longs on her and she really woke up. Overall a good deal. I would say it seems expensive for the cheap plastic it's housed in. $270.00 isn't easily forgotten when it's ruined by rain, dirt or cracking. Make it more solid.

Back to Top