1. Parts
  2. Exhaust

2012 Harley-Davidson Dyna FLD Switchback Exhaust

2012 Harley-Davidson Dyna FLD Switchback
Tire Size:
Front: 130/70-18, Rear: 160/70-17
Spark Plug:
DCPR7E
Battery:
YTX20L-BS
Stock Chain/Belt:
131T
Stock Gearing:
Front: 32T, Rear: 66T
Oil Filter:
KN-171B
Select Your Ride: Go

Refine
Reset
Sort By:
Grid List
Vance & Hines
Chrome Pro Pipe
$562.99 - $629.99
You save up to $69.96 (9%)
  • Chrome
(11)
Vance & Hines Chrome Pro Pipe The Vance & Hines exhaust pipe for those who prefer the 2-into-1 look, the Chrome Pro funnels the power and sound through one large, gleaming chrome end pipe. Designed...
Accel High-Temperature Exhaust Wrap Kit Wraps will increase power and reduce radiated exhaust heat Kits include 25ft. 2-in. wide top quality high-temperature wrap and four stainless steel tie...
Kuryakyn
Torque Cones
$29.69
You save $3.30 (10%)
  • Silver
(0)
Kuryakyn Torque Cones Straight pipes sound sweet, but for street use they're a performance disaster! Here's an inexpensive way to get back some of that lost horsepower and gas mileage without affec...
Biltwell Iron Exhaust Flange Set Construction: Cold-rolled 16-gauge (0.060"/1.5mm) x 1-3/4" O.D. high-tensile steel tubing, raw finish. One tube (two ends) per order. Each tube includes 2 header fl...
Cobra
Stainless T-Bolt Clamps
$8.46 - $12.79
You save up to $2.16 (14%)
  • Silver
(6)
Cobra Stainless T-Bolt Clamps Keep it together with the best clamps in the business Stainless steel construction resists rust and heat Sold each Made in the U.S.A.
Biltwell Exhaust Builder's Pipe Kit WHAT'S HERE: Our Builder Exhaust Kit is exactly what its name implies: a selection of pre-fabbed tubing, header flanges and exhaust tips that puts the art of cus...
Crusher
Smooth Power Cell Heat Shield
$62.99
You save $7.00 (10%)
  • Chrome
(0)
Crusher Smooth Power Cell Heat ShieldGive your Power Cell exhaust a new look! This clean and simple styled chrome heat shield is perfect for those who desire that understated look.Fits: All Crusher...
Vance & Hines
O2 Sensor Harness Extension
$26.99
You save $2.96 (9%)
  • Black
(0)
Vance & Hines O2 Sensor Harness Extension 6" extension harness Reduces the 18mm O2 bungs on 09 models to 12mm O2 bungs on 10-13 models No cutting or splicing required Made in the U.S.A.
Performance Machine
Sweep Exhaust End Caps
$89.96 - $116.96
You save up to $12.99 (9%)
  • Contrast Cut
  • Chrome
(0)
Performance Machine Sweep Exhaust End Caps    CNC machined billet aluminum construstion Available in chrome and contrast cut Contrast cut starts with a polished end cap that has been black anodize...
Crusher
Maverick 2 into 2 Exhaust System
$521.99 - $539.99
You save up to $60.00 (10%)
  • Black
(0)
Crusher Maverick 2 into 2 Exhaust SystemRenegade styling for bold bikers. Embossed stainless steel bands and signature precision-machined billet aluminum tips. Deep reverberation, solid power gains...
Bassani
Road Rage 2-into-1 Exhaust System
$584.96 - $692.96
You save up to $76.99 (9%)
  • Black
(1)
Bassani Road Rage 2-into-1 Exhaust System Stepped headers merge into a true reverse-cone megaphone muffler 1-3/4” headpipe steps up to 1-7/8” into the collector to increase flow a...
Vance & Hines
Black Series Pro Pipe
$719.99
You save $79.96 (9%)
  • Black
(1)
Vance & Hines Black Series Pro Pipe  Pro Pipe Black is the latest evolution in the Vance & Hines 2-into-1 legacy, Complete with header and collector heat shields, as well as a shield over the first...
VIDEO     
Vance & Hines
Twin Slash Duals Exhaust System
$899.96
You save $99.99 (9%)
  • Chrome
(0)
Vance & Hines Twin Slash Duals Exhaust System Designed exclusively for the new Dyna Switchback, Vance & Hines introduces Switchback Twin Slash Duals, a complete exhaust system that brings the class...
Vance & Hines
Monster Duals Exhaust System
$1,169.96
You save $129.99 (9%)
  • Chrome
(0)
Vance & Hines Monster Duals Exhaust SystemDesigned exclusively for the new Dyna Switchback, Vance & Hines introduces Switchback Monster Duals, a complete exhaust system that brings the classic look...

Latest Reviews

Michael (Lake Munmorah )

Fit
Finish
Durability
Features
Cost Benefit

Vance & Hines fitment on 2007 Suzuki C50 Boulevard Warning!

I just fitted the Vance & Hines Slash staggered to my Boulevard C50 and found that there is discrepancies between the header flanges to the rear fastening plate by as much as 5mm gap after tightening the headers to the engine exhaust ports now this may not sound serious but the fact is that if you were to tighten the rear exhaust plate to the bikes main exhaust mounting, you will certainly put stress on the engine header and pipes full time. To avoid this problem you will need to 1. when fitting tightening the header flanges exhaust make sure they seat flat on engine ports first. 2. then check the rear plate gap between the exhaust plate and bikes mounting plate, if required pack the gap with washers then tighten plate bolts 3. Check Brake pedal lever clearance and move the footrest downward by releasing the bolts and placing a 2mm thick half washer on top of the bolts between the frame and footrest plate bolts to clear the front pipe shield and then you are set to go, well almost 4. Your Heat Oxygen sensor must be put back on the rear cylinder pipe #1 if you don't want to cut or disable pin 23, It is best to leave your ECU alone, Enjoy!!

Dan (Kelso )

Fit
Quality
Sound
Install
Performance

Good Fit And Finish

I have a 2011 FLHTK. The headers look great on the bike. They are quite a bit louder than stock, when you get on the gas. I didn't think the install was as difficult as some of the reviews state. Although, the pictures could be better. Make sure to read all instructions first.

Jerry (Roswell )

Fit
Quality
Sound
Install
Performance

Best investment!

I purchased these for my 2009 Street Bob. They took a couple days to ship out, but actually arrived a day early because of UPS. They went right on and the bike runs great and sounds great. Did not have to buy a fuel management system like most dealers will tell you that you must buy or the bike will run lean. The best investment I have made for my bike.

Rex (Frankfort )

Fit
Quality
Installation
Recommend

Bassani Firepower mufflers are great

The quality of build is equal to the HD factory parts. I did however need to use the factory attachment screws as the new ones didn't work. The sound is very powerful. Sounds like the bigger motored HD bikes now. It is very different from stock even at idle. The power increase...is unmistakeable. These pipes add about 10% more HP and Torque over stock according to a dyno test I read online. I think that might be conservative. My bike is stock otherwise.

Johnny (Eatonton )

Fit
Quality
Installation
Recommend

Nice Addition

Great fit, sound and appearance. I didn't want something so loud it would be an annoyance to the neighbors, but wanted it to sound like a Harley. I had them installed in lest than 15 minutes and it was a nice addition in sound to my 2014 Ultra Limited. I like them a lot.

;
Back to Top