1. Dirt Bike
  2. Parts
  3. Suspension

2006 KTM 250 XC-W Suspension

Select Your RideGo

Narrow Your Results
Reset
Grid List
1-12 of 12
Pivot Works
Fork Rebuild Kit
$74.95
$67.99
You save $6.96 (9%)
(20)
Pivot Works Fork Rebuild KitContains everything you need to do a rebuild in one simple ease kit Kit contains seals, scrapers, upper & lower Teflon bushings & O-rings Huge saving from the OEM component
Western Power Sports
Fork Boots
$20.95
$18.99
You save $1.96 (9%)
(5)
Fly Racing Fork Boots Protect fork tubes from dirt and debris Extremely durable and flexible for a snug fit Bubble Pack displayed Sizing Information: Top Opening:  1 3/4", 43mm Bottom Open
Moose Racing
Fork Skins
$19.95 - $27.95
(10)
Moose Racing Fork Skins Helps protect vulnerable fork tube and seal from dust, dirt, and corrosive elements Designed to fit closely over upper and lower fork tubes Constructed of a
Daystar
Fork Boots
$17.95 - $29.95
(11)
Daystar Fork Boot Protection from dirt, rocks and other contaminants Boots utilize the latest advances in material technology to adapt to fork and styling demands Sizing Information: D58: Availabl
Bearing Connections Shock Bearing Kit The most affordable shock bearing kits available Includes high-quality bearings and seals for restoring upper and lower shock mount Upper and lower bearing and se
Moose Racing Shock Seal Head Kit Complete assemblies, ready to install into the shock body Made from 6061-T6 aluminum and the same custom elastomer as our fork seals All have air bl
Moose Racing Fork Bushing KitBushings dyno tested to 500,000 strokes with less wear than OEM Kit includes 2 slider bushings and 2 leg bushings Kit includes all copper washers and O'rings Kit includ
Pivot Works
Rear Shock Bearing Kit
$79.95
$71.99
You save $7.96 (10%)
(7)
Pivot Works Rear Shock Bearing KitComplete kits for rebuilding often neglected shock areas and includes lower shock bushings or bearings Kits feature parts made from OEM grade materials All components
MSR
Forkskins
$19.95
$17.99
You save $1.96 (10%)
(2)
MSR Racing Forkskins Protects vulnerable fork tube and seal from dust, dirt and corrosive elements Constructed of double lined 3mm thick neoprene and sealed using double stitching In
Moose Racing Shock Bearing Kit Kit includes the shock bearing, seals, spacers, and pins (if required) to rebuild the shock link Premium design and construction stands up to tough conditions Older
Pivot Works
Shock Rebuild Kit
$99.95
$89.99
You save $9.96 (10%)
(0)
Pivot Works Shock Rebuild KitOnly complete shock rebuild kit on the market Includes bladder, new complete seal-head, piston ring, piston o-ring, bumper, and new shaft nut Restores plush shock actions
Race Tech
WP PDS Compression Needle
$119.95
$113.99
You save $5.96 (5%)
(0)
Race Tech WP PDS Compression Needle The beauty of KTM's PDS rear suspension system is that it is very simple. The problem is it lacks gradual progressiveness. Suspension setup is a BIG compro

Latest Reviews

Mike (Waco, TX)

Fit
Quality
Installation
Recommend

inexpesive seal kit...

I bought this seal kit to rebuild the forks off a 2009 crf450x, and although it was nice that pretty much everything was included in the kit at $60-70, the seals began leaking after about a month worth of dual sport riding.

John (Montpelier, VA)

Fit
Quality
Installation
Recommend

Fork Seals

Installed easily on my Yamaha Maxim 400 without any difficulty. No leaks so far.

BobbyE (Union, NJ)

Fit
Quality
Installation
Recommend

Good spring involves some work

Its a good product, works well so far, no problem. Much stiffer ride. Now the kit gives you one piece of pipe that needs to be cut into two spacers, one for each fork. So math and measuring is involved. Its not just take old stuff apart and replace with new. I didn't know that so hope this helps others.

Paul (Auburn, WA)

Fit
Quality
Installation
Recommend

Quality Bearing Kit

Perfect fit on my 2006 KTM 200 XC-W. Motion Pro Heim Joint tool was a must for easy bearing removal and installation.

Aaron (Louisville, KY)

Fit
Quality
Installation
Recommend

Great spring

Used on a 2011 CRF70. Works with no problem.

Back to Top