1. Cruiser Motorcycle
    2. Parts
    3. Suspension

    1986 Suzuki Intruder 700 Suspension

    1986 Suzuki Intruder 700
    Tire Size:
    Front: 100/90-19, Rear: 140/90-15
    Spark Plug:
    DP8EA-9
    Battery:
    YB16B-A1
    Oil Filter:
    KN-134
    Select Your Ride:Go

    Narrow Your Results
    Reset
    Grid List
    1-8 of 8
    Closeout 10% off
    Progressive Suspension
    Front Fork Springs
    $92.95
    $83.99
    You save $8.96 (10%)
    (11)
    Progressive Suspension Front Fork Springs Front Fork Springs from Progressive Suspension Progressive springs offer a soft initial spring rate for a plush ride Progressively wound design provides incr
    Parts Unlimited Front Fork Seals For secure oil levels and reduced stiction, replace those old fork seals. High quality replacement seals Original equipment-stye seals Sold in pairs **Note: Some bi
    Progressive Suspension
    Fork Lowering Kit
    $118.95
    $107.99
    You save $10.96 (9%)
    (0)
    Progressive Suspension Fork Lowering Kit An easy and inexpensive way to drop the front end one or two inches Progressively-wound fork springs, spacers, and lowering components Kit works with 41mm

    Latest Reviews

    Terry (Austin, TX)

    Fit
    Quality
    Installation
    Recommend

    Fork Seals

    Fork seals fit my VTX1300C perfectly and are doing fine after the first 100 miles. Time will tell how they hold up. Fast shipment and delivery as always. Thanks gang!

    Alan (Idaho Falls, ID)

    Fit
    Quality
    Installation
    Recommend

    Progressive fork springs fo Honda VTX 1800R

    Fit was good, quality good, installation was not too bad-YouTube was helpful. Greatly improved the overall ride over the stock springs, not as harsh when hitting chuck holes and good feel in the corners.

    Bobby (Phoenix, AZ)

    Fit
    Quality
    Installation
    Recommend

    Didn't work for me.

    I read the great reviews and thought these would work for me. I have a 2005 1200 Custom and this site recommended these for my bike. They installed just fine but bottomed out, even on the highest setting. That was just me on the bike with no other gear.

    DK (Gouvernuer, NY)

    Fit
    Quality
    Installation
    Recommend

    Bushing kit HD Suspension

    Local shop said the bushings can't be replaced and new shocks were necessary. Found this product and for 18.00 the bushings were replaced in less than an hour. Not a hard task to change. These bushings were a perfect fit; pay close attention to the bolts removed, they appear to have a larger grip area which is actually the replaceable sleeve which also is in the kit.

    Glen (Purley, SRY)

    Fit
    Quality
    Installation
    Recommend

    412 11 inch

    Replaced stock 13 inch shocks the bike came with. Noticed a real improvement. Bumps are much more smoothly dealt with and the ride is much more forgiving. Gives the bike a nice slammed look as well. No major issues with bottoming out. Just take speed bumps slow and avoid potholes. Strongly recommend these shocks!

    Back to Top