1. Parts
  2. Exhaust

1995 Harley-Davidson Sportster 1200 - XL1200 Exhaust

1995 Harley-Davidson Sportster 1200 - XL1200
Tire Size:
Front: 100/90-19, Rear: 130/90-16
Spark Plug:
DCPR7E
Battery:
YB16-B-CX
Stock Chain/Belt:
128T
Stock Gearing:
Front: 29T, Rear: 61T
Oil Filter:
KN-171B
Select Your Ride: Go

Refine
Reset
Sort By:
Grid List
Vance & Hines
Big Shots Quiet Baffle
$35.96
You save $3.99 (9%)
  • Steel Grey
(47)
Vance and Hines Quiet Baffle Pre-wrapped 2-3 dB quieter Fits Vance & Hines Big Shots Staggered & Big Shots Longs with Power Chamber, and Python Staggered Duals Measures 2 in. o.d. x 10 1/2 in. L...
Accel High-Temperature Exhaust Wrap Kit Wraps will increase power and reduce radiated exhaust heat Kits include 25ft. 2-in. wide top quality high-temperature wrap and four stainless steel tie...
Performance Machine
Tech 10 Exhaust End Caps
$89.96 - $116.99
You save up to $12.96 (9%)
  • Contrast Cut
  • Chrome
(0)
Performance Machine Tech 10 Exhaust End Caps CNC machined billet aluminum construstion Available in chrome and contrast cut Contrast cut starts with a polished end cap that has been black anodized...
Kuryakyn
Torque Cones
$29.69
You save $3.30 (10%)
  • Silver
(0)
Kuryakyn Torque Cones Straight pipes sound sweet, but for street use they're a performance disaster! Here's an inexpensive way to get back some of that lost horsepower and gas mileage without affec...
Biltwell Iron Exhaust Flange Set Construction: Cold-rolled 16-gauge (0.060"/1.5mm) x 1-3/4" O.D. high-tensile steel tubing, raw finish. One tube (two ends) per order. Each tube includes 2 header fl...
Cobra
Stainless T-Bolt Clamps
$8.46 - $12.79
You save up to $2.16 (14%)
  • Silver
(6)
Cobra Stainless T-Bolt Clamps Keep it together with the best clamps in the business Stainless steel construction resists rust and heat Sold each Made in the U.S.A.
Drag Specialties Exhaust Flange Kit A shiny new exhaust should be mounted with shiny new exhaust flanges, not old scratched rusty ones. Kit includes two chrome flanges with retaining clips
Novello Performance Exhaust Port Gasket Increase flow 7 to 10 cubic feet per minute (CFM) depending on the motor and head work Will not restrict gas flow like some mesh gaskets High-quality...
Performance Machine
Clean Cut Exhaust End Caps
$89.96 - $116.96
You save up to $12.99 (9%)
  • Chrome
  • Contrast Cut
(0)
Performance Machine Clean Cut Exhaust End Caps CNC machined billet aluminum construstion Available in chrome and contrast cut Contrast cut starts with a polished end cap that has been black anodiz...
Performance Machine
Slash Exhaust End Caps
$89.96 - $116.99
You save up to $12.96 (9%)
  • Contrast Cut
  • Chrome
(0)
Performance Machine Slash Exhaust End Caps    CNC machined billet aluminum construstion Available in chrome and contrast cut Contrast cut starts with a polished end cap that has been black anodize...
Performance Machine
Merc Exhaust End Caps
$89.96 - $116.96
You save up to $12.99 (9%)
  • Contrast Cut
  • Chrome
  • Black Ops
(0)
Performance Machine Merc Exhaust End Caps CNC machined billet aluminum construstion Available in chrome and contrast cut Contrast cut starts with a polished end cap that has been black anodized, t...
Biltwell Exhaust Builder's Pipe Kit WHAT'S HERE: Our Builder Exhaust Kit is exactly what its name implies: a selection of pre-fabbed tubing, header flanges and exhaust tips that puts the art of cus...
Vance & Hines
Header Wrap Kit
$71.99
You save $7.96 (9%)
  • Black
(1)
Vance & Hines Header Wrap Kit Vance & Hines Header Wrap kit is the answer if you are looking to customize your exhaust system. Black header wrap gives your motorcycle exhaust a cool custom/ret...
SuperTrapp
XR-Style 2 into 2 Exhaust System
$786.21 - $849.19
You save up to $149.76 (14%)
  • Chrome
(0)
SuperTrapp XR-Style 2 into 2 Exhaust System Built of 304 stainless steel (pipes turn a beautiful gold finish after being run) 1-3/4" headpipes exit into true reverse-cone megaphone mufflers ...
Bassani
Radial Sweepers Exhaust System
$439.00 - $476.96
You save up to $52.99 (9%)
  • Chrome
  • Black
(3)
Bassani Radial Sweepers Exhaust System Performance stepped headers with radial rear section Fabricated from 16-gauge steel Direct bolt-on design for easy installation Baffles and heat shields not ...
VIDEO     

Latest Reviews

Michael (Lake Munmorah )

Fit
Finish
Durability
Features
Cost Benefit

Vance & Hines fitment on 2007 Suzuki C50 Boulevard Warning!

I just fitted the Vance & Hines Slash staggered to my Boulevard C50 and found that there is discrepancies between the header flanges to the rear fastening plate by as much as 5mm gap after tightening the headers to the engine exhaust ports now this may not sound serious but the fact is that if you were to tighten the rear exhaust plate to the bikes main exhaust mounting, you will certainly put stress on the engine header and pipes full time. To avoid this problem you will need to 1. when fitting tightening the header flanges exhaust make sure they seat flat on engine ports first. 2. then check the rear plate gap between the exhaust plate and bikes mounting plate, if required pack the gap with washers then tighten plate bolts 3. Check Brake pedal lever clearance and move the footrest downward by releasing the bolts and placing a 2mm thick half washer on top of the bolts between the frame and footrest plate bolts to clear the front pipe shield and then you are set to go, well almost 4. Your Heat Oxygen sensor must be put back on the rear cylinder pipe #1 if you don't want to cut or disable pin 23, It is best to leave your ECU alone, Enjoy!!

Dan (Kelso )

Fit
Quality
Sound
Install
Performance

Good Fit And Finish

I have a 2011 FLHTK. The headers look great on the bike. They are quite a bit louder than stock, when you get on the gas. I didn't think the install was as difficult as some of the reviews state. Although, the pictures could be better. Make sure to read all instructions first.

Jerry (Roswell )

Fit
Quality
Sound
Install
Performance

Best investment!

I purchased these for my 2009 Street Bob. They took a couple days to ship out, but actually arrived a day early because of UPS. They went right on and the bike runs great and sounds great. Did not have to buy a fuel management system like most dealers will tell you that you must buy or the bike will run lean. The best investment I have made for my bike.

Rex (Frankfort )

Fit
Quality
Installation
Recommend

Bassani Firepower mufflers are great

The quality of build is equal to the HD factory parts. I did however need to use the factory attachment screws as the new ones didn't work. The sound is very powerful. Sounds like the bigger motored HD bikes now. It is very different from stock even at idle. The power increase...is unmistakeable. These pipes add about 10% more HP and Torque over stock according to a dyno test I read online. I think that might be conservative. My bike is stock otherwise.

Johnny (Eatonton )

Fit
Quality
Installation
Recommend

Nice Addition

Great fit, sound and appearance. I didn't want something so loud it would be an annoyance to the neighbors, but wanted it to sound like a Harley. I had them installed in lest than 15 minutes and it was a nice addition in sound to my 2014 Ultra Limited. I like them a lot.

;
Back to Top