1. Accessories
  2. Tools
  3. Motion Pro
  4. Snow

Motion Pro Snow Tools

Refine
Sort By:
Grid List
Motion Pro Cable Luber
Motion Pro
Cable Luber
$8.99
You save $1.00 (10%)
  • Black
(57)
Video
VIDEO     
Motion Pro Cable LuberUsed to inject lubricant into any cable housing, this Motion Pro Cable Luber will keep your bike running smooth. Clamps over housing and wire allowing an aerosol can to be co...
Motion Pro Clutch Holding Tool
Motion Pro
Clutch Holding Tool
$23.39
You save $2.60 (10%)
(12)
Motion Pro Clutch Holding Tool Made from medium carbon steel with hardened jaws Holds clutch hubs, flywheels, gears, sprockets, etc... Features spanner pins Jaws open to 5" wide
Motion Pro 18mm Spark Plug Socket Wrench
Motion Pro
18mm Spark Plug Socket Wrench
$19.79
You save $2.20 (10%)
(12)
Motion Pro 18mm Spark Plug Socket Wrench Specifically designed for Honda XR400's as a trail tool, but fits many models with 18mm plugs The socket is designed to fit into the spark plug cavi...
Motion Pro Metric Multi-purpose Tool
Motion Pro
Metric Multi-purpose Tool
$53.09
You save $5.90 (10%)
(4)
Motion Pro Metric Multi-purpose Tool Any trail rider whose fanny pack doesn't have one of these is seriously unprepared Can be used to remove 8mm, 10mm, 12mm, and 14mm bolts; #2 and #3 Phi...
Motion Pro Hydraulic Brake Bleeder
Motion Pro
Hydraulic Brake Bleeder
$16.19
You save $1.80 (10%)
(16)
Motion Pro Hydraulic Brake Bleeder New brake bleeder will aid in the bleeding and servicing of hydraulic brakes Makes bleeding brakes a one man job The unique check valve allows fluid and...
Motion Pro Master Cylinder Snap Ring Plier
Motion Pro
Master Cylinder Snap Ring Plier
$25.19
You save $2.80 (10%)
(0)
Motion Pro Master Cylinder Snap Ring Plier Allows removal of internal snap rings used in hydraulic master cylinders Replaces 07914-SA50001 and AKS-316-2010 Can be used to remove and replace small ...
Motion Pro Degree Wheel
Motion Pro
Degree Wheel
$13.49
You save $1.50 (10%)
  • Black
(0)
Motion Pro Degree Wheel Manufactured from .052" thick aluminum with a 6.75" outside diameter and a 6mm center hole Black anodized finish makes increments easy to read Can be used on all engi...
Motion Pro Ratchet Plug Wrench
Motion Pro
Ratchet Plug Wrench
$14.39
You save $1.60 (10%)
(2)
Motion Pro Ratchet Plug Wrench 13/16" ratchet spark plug wrench made specifically for today's water-cooled 2-stroke engines with those hard to reach spark plugs The ratchet mechanism makes ...
Motion Pro Snap Ring Pliers
Motion Pro
Snap Ring Pliers
$14.40
You save $1.59 (10%)
(2)
Motion Pro Snap Ring Pliers Economical pliers easily does both inside-and-outside opening snap rings or clips Includes three extra sets of tips: one additional straight up and two offset or angle ...
Motion Pro Tappet Tool Set
Motion Pro
Tappet Tool Set
$40.49
You save $4.50 (10%)
(4)
Motion Pro Tappet Tool Set Heat treated and chrome plated for durability 3 wrenches: 8mm, 9mm and 10mm 3 adjusters: screw-type and 3mm & 4mm square-type Interchange adjusters and wrenches for ...
Motion Pro Compression Tester
Motion Pro
Compression Tester
$107.99
You save $12.00 (10%)
(0)
Motion Pro Compression Tester Designed to check cylinder compression Contains hoses for 10, 12 and 14mm spark plug applications Includes a quick-disconnect with pressure-release valve, 30...
Motion Pro Oil Filter Strap Wrench
Motion Pro
Oil Filter Strap Wrench
$10.79
You save $1.20 (10%)
(14)
Motion Pro Oil Filter Strap Wrench Fits all spin-on type oil filters Use with 3/8" drive ratchet handle Easily loosens tight filters Fits into hard to reach locations Can be used to loosen or tigh...
Motion Pro Steel O-Clip and Pincher Tool
Motion Pro
Steel O-Clip and Pincher Tool
$17.55
You save $1.95 (10%)
(0)
Motion Pro Steel O-Clip and Pincher ToolLow cost O-clips are ideally suited for clamping vinyl or Nitrile fuel line to fittings One-piece construction assures positive clamping action without damag...
Motion Pro Multi-Valve Tool
Motion Pro
Multi-Valve Tool
$107.09
You save $11.90 (10%)
(0)
Motion Pro Multi-Valve Tool Used to install the valve spring keepers without the need for a large, cumbersome valve spring compressor Designed to fit the valves of four and five valve per cylinder...

Latest Reviews

Lawrence C (Boca Raton )

Fit
Finish
Durability
Features
Cost Benefit

Did not Work

This product did not work on the steel clutch cable I purchased from motorcycle superstore. I needed a new clutch cable for a Honda VTX 1300. Tried this product lube sprayed all over the place. Had to do old fashion way with a plastic bagging and get the lube to go down the cable that way. Not sure what to do with this product? I was hoping it would have worked!!!

Kristen Bare (Portage )

Fit
Finish
Durability
Features
Cost Benefit

Highly recommend

Fit perfectly. Nothing else worked to break the axle nuts loose. Used these with breaker bars. Would also highly recommend Motorcycle Superstore. They are super! Order was delivered next day.

Chris (Mt AIry )

Fit
Quality
Installation
Recommend

Nothing like the right tool for the job

I take care of 34 training bikes all of which are either GZ 250s or TU 250s. Had cause to adjust the valves on some & after fiddling around with a tiny open end wrench, etc. I came across these. WHAT A BREEZE it is now. I really like how you can mix & match the inner finger drive with the outer part to fit pretty much any combo!!