Dave
Oceanside, CA
Great tools!!
These are some of the best tools I've ever used!!!
Dave Griffith
Oceanside, CA
Great tools!!
These are some of the best tools I've ever used!!!
Drew Case
San Rafael, CA
Motion Pro Tire Iron Spoon Good to Have
I use the Motion Pro Tire Spoon as an accessory to my Coats tire changer when I just need a little bit of help. It curves around the rim bead area nicely and has a comfortable handle; not bulky but large and stout enough to serve its purpose, thanks for a nice product.
Bill
Kansas City, KS
Nice Tool
I needed that third iron to help get my tires on. This one is long, sturdy and much easier on the hands with the looped in. It's nice!
Bill Mullen
Trumbull, CT
Motion Pro does it again!
This another great tool from Motion Pro. The rounded spoon shape end prevents tube from being pinched and ruining your day. I've tried other tire tools but the pointed ends often pinched the tubes sending me back to the store forking over more money for a new tube plus gas money and just as important eating up my time! The good news is this tool cost no more than the other tools that pinch the tubes. Every toolbox should have at least two of these. I have three of them. No more pinched tubes for me! I give it 5 stars.
Rick
Fort Collins, CO
Silver Spoon
Great product that made short work of the tire changes.
Justin
Tallahassee, FL
Great Spoons
Never will I have to pay to change a tire with these...I ordered three, one may be able to get by with two but I always need three. Perfect length for dual sport travel...long enough to easily break a bead and change a tire. Great spoon shape reduces possibility of pinch flat.
Steve Bradley
Wadsworth, OH
Motion Pro - Spoons make a tough job a little easier
Motion Pro spoons and a little elbow grease made the job of replacing two tires on my son's Honda XR100R. Getting the tires off and on, both front and back took less than 30 minutes using these spoons.
Anthony
Closter, NJ
No Pinch Tubes
Used them the first time and they worked perfect, enough leverage at 10.5” and the finish is what you would expect.
No pinch tubes, it’s a matter of equipment and technique. Use windex and remember to baby powder the tube and the inside of the new tire before installing.
Fine product these spoons are.
Chuck Traner
Houston, TX
This and a bit of sweat equity = savings
Paying ~$100 a pop to have a shop change my tires was somewhat erking. Three of these spoons and some wheel weights, plus a borrowed wheel balancer did the trick lickity-split. Thought they mighta been longer, but... turns out I didn't need um to be. Zakly what I wuz lookin for.
Dave B
Windsor, CA
The Real Thing
What can I say that you don't already know - Motion Pro makes some good stuff.
scott
saint george, UT
tire spoon
Remember it is only 10 inches long. The rounded end is a cool concept. Price is a bit high imo. Need a couple more of these. A 16 incher would be nice for the same price.
Tom
DeKalb, IL
Great little spoon!
Use this as a helper spoon. It's to short for prying a bead, but works great as a helper. Quality is top notch and should last longer than me.
Daryl Martinez
Ft. Gibson, OK
Spoons
Considering the dealership here demands 40 dollars a tire...off the bike...to swap tires I bought three spoons and re-started doing it myself. The adage is true…if you’re struggling with the tire, you're doing something wrong. I am doing tubeless tires as easy as tubed. Three spoons make tire changes as easy as I remembered!
Andrew
Fort Worth, TX
Tire Spoons
Great product, very strong. You may need a third one but you can make it work fine with two spoons. I used them to put on some D606's and I had no issues. Thanks.
James E. Saxon
Millen, GA
Motion Pro-Spoon Tire Iron
Purchased 2. Using both of these plus a large flat blade screw driver. I changed the rear tire of my bike. Tools help prevent damage to tube, very handy, worked great. I recommend these to everybody that want to do it yourself.
Andrew
Fort Worth, TX
Tire Spoons
Great product, very strong. You may need a third one but you can make it work fine with two spoons. I used them to put on some D606's and I had no issues. Thanks
Laurence Holden
Clayton, GA
Motion Pro- spoon tire iron
Had mine for only a month or so - may not get to use them for years (hopefully) - but they look like very substantial tire irons, well made and finished, with particular care in the shaping of the spoons.
Mark
Spring, TX
Spoon Tire Iron
I bought 2 of these, worked very good changing my tires. It would have been even easier had I bought 3 of them. I'd recommend getting 3 of them, especially if you don't have a lot of experience changing tires (like me), but 2 work just fine.
Ray
Mc minnville, TN
Motion Pro Iron
I bought two of them and they work great. Took an hour per tire, I used the irons to break the bead. No hammers or anything like that just took my time.
Mark
Deltona, FL
Good spoon
Good, strong spoon, doesnt slip, change my tires in minutes..
Ed
Ofallon, IL
Motion Pro - Spoon Tire Iron
This is a good quality tire tool. It held-up even after repeated blows with the hammer to break the bead on some tires that were 11 years old. It never bent, chipped, or mushroomed. The only bad thing I have to say about this item is I wish I would have bought two of them!
Jesus Pantoja
Whittier, CA
Another great item for tire changes
The spoon end helps spread the pressure on the rim so as not to dent, and the length is good for leverage.
D. Howard
Yorba Linda, NV
Motion pro spoon tire iron
It works excellent for what I bought it for. A tube and two irons fit perfect in my fender tube bag with no sharp or rough edges to puncture the tube or the bag. I've had to change two flats already, no complaints.