Simple and works
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Wade -
May 28, 2013(Shirley, IN)
I've used it 4 times. It works fine. Light weight in the tool kit.
Worked great
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Scott -
January 15, 2013(Purcell, OK)
Worked great. Will last if I take care of it. Would buy another if I lose this one.
Task Tool
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Mike M. -
November 26, 2012(Pace, FL)
Average Tool, cost was low and worth what I paid for it. Does its job well, if it was knurled and stainless I would have given it a 5 across the board.
Not much to say
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Isaac -
June 26, 2012(Albuquerque, NM)
It's hard to say much about it. It works, it's cheap, and there's nothing on it to break really, so I'm guessing it's durable.
Does the job
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Mike -
June 26, 2012(Rochester, NY, NY)
Removes valve core real easy.
Great tool
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Nick -
March 26, 2012(Murfreesboro, TN)
You can put this in a driver handle which makes using it a breeze. Also, if you have valve stems that lay down close to the rim, the standard cross shaped one will not work, because there is no room to turn it. That's not a problem for this one though...
Cheap, Works
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
dub -
February 13, 2012(Lake Tahoe, CA)
It does what it's supposed to do and doesn't cost a lot. If you have a valve core to remove, this is the ticket.
You Must Have One!
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Jason -
January 30, 2012(Sacramento, CA)
If your changing tires, this tool is a must. Well made of course because it comes from Motion Pro. Cheap as well on the pocket book....
too long for my bike wheel
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Tom -
November 04, 2011(Scituate, MA)
Yes, I could have measured the space above the valve first, but I was in a hurry and didn't. The quality of the metal seems excellent. I had to cut it down to make it shorter in order to use it with a crescent wrench, but it was impossible to cut with a hacksaw. Fortunately, my dremel with a cut-off wheel did the job, just in case anyone else has to make it shorter.
Core Remover
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Joe -
August 31, 2011(Provo, UT)
Does it's job. What more is there to say?
