Driven Engine Block Off Plates

Was $29.95 - $106.99 $26.99 - $96.30 You save up to $10.69 (10%)

Rating 3.64 of 5 (11 Reviews)

This Product Qualifies for Free Shipping

Please select your bike

In Stock
Unavailable

Qty:

Product Information

Driven Engine Block Off Plates
  • Made from 6061 T-6 billet aluminum
  • The most accurate way to tune your bike on the dyno
  • A trouble free way to eliminate unwanted air leaks
  • Easily remove excess weight from your motorcycle
  • Comes complete with detailed instructions and an airbox cap
  • Available in anodized black or natural finish
  • Item # 30393
  • SKU #
  • Mfr. Part #

FitmentView All

Aprilia Models

  • RSV4 : 2009
  • RSV4 Factory : 2010

BMW Models

  • S1000RR : 2010–2011

Ducati Models

  • 1199 Panigale : 2013
  • 1199 Panigale R : 2013
  • 1199 Panigale S : 2013

Honda Models

  • 919 : 2002–2007
  • CBR1000RR : 2008–2010, 2012, 2015
  • CBR1000RR ABS : 2015
  • CBR250R : 2011–2013
  • CBR250R ABS : 2011–2013
  • CBR500R ABS : 2013–2015
  • CBR600F4 : 1999–2000
  • CBR600F4i : 2001–2006
  • CBR600RR : 2007–2012
  • CBR929RR : 2000–2001
  • CBR954RR : 2002–2003
  • CRF250L : 2013–2014

Kawasaki Models

  • Ninja 250R : 2008–2012
  • Ninja 650R : 2006–2011
  • Ninja ZX-10R : 2004–2008, 2011–2012
  • Ninja ZX-12R : 2000–2005
  • Ninja ZX-14 : 2006–2009
  • Ninja ZX-6R : 2000, 2002–2012
  • Ninja ZX-7R : 1991–1994
  • Ninja ZX-9R : 1995–2003
  • Versys : 2011–2013

KTM Models

  • 950 Adventure : 2003–2007
  • 950 Super Enduro : 2007
  • 950 Supermoto : 2005–2007
  • 950 Supermoto R : 2006–2007
  • 990 Adventure : 2007–2009, 2012
  • RC8 : 2008–2010
  • RC8R : 2009–2012

Suzuki Models

  • Bandit 1250 : 2007–2008
  • Bandit 1250S : 2007–2009
  • Burgman 400 : 2003–2009
  • Burgman 400 ABS : 2008–2009, 2011
  • GSX-R1000 : 2001–2009, 2014
  • GSX-R600 : 1996–2003
  • GSX-R750 : 1997–1999, 2001–2005
  • Hayabusa : 1999–2009
  • M109R : 2008–2009, 2011–2013
  • SV1000 : 2003–2006
  • SV650 : 2003–2009
  • SV650 ABS : 2007–2008
  • TL1000R : 1998–2003
  • TL1000S : 1997–2001
  • V-Strom 1000 : 2004–2009, 2012
  • V-Strom 650 : 2004–2009
  • V-Strom 650 ABS : 2007–2009, 2011

Triumph Models

  • Daytona 675 : 2008–2012
  • Street Triple : 2012
  • Street Triple 675 : 2008–2009

Yamaha Models

  • FZ-09 : 2014–2015
  • FZ1 : 2001–2015
  • YZF-R1 : 2004–2014
  • YZF-R6 : 2003–2015
  • YZF-R6S : 2006–2009

Product Reviews 1 - 11 of 11

Overall Rating: 3.64 of 5

(11 Reviews)
5
5
4
1
3
1
2
1
1
3
What Other Riders Are Saying...

Fit

Quality

Installation

Recommend

Great!!!

Went onto a 2010 r6. Fit great looks nice and make a huge difference. I had lots of backfire before and now I have little to none.

Connor - October 26, 2015

(Round lake, IL)

Fit

Quality

Installation

Recommend

Terrible

First, it never came with the airbox plug like it was supposed to, second two holes that where supposed to be drilled where not drilled at all. Ended up just connecting my pair valves together with a hose, works just as good and it cost me $3. I would NOT recommend this to anyone let alone a friend.

Christian - February 5, 2013

(Alameda, CA)

Fit

Quality

Installation

Recommend

Plates for 08 CBR1000RR

The plates fit very well on my bike, but the instructions were a little vague. Luckily there was a thread on my forum. The instructions also told me to shorten the bolts used, but I didn't need to (Just putting that out there). Would highly recommend these plates to anyone who wants to do the block-offs.

Jeremy - December 11, 2012

(Augusta, GA)

Fit

Quality

Installation

Recommend

Garbage for 03-06 zx6r

These don't fit properly for 03-06 zx6r's. I had to drill the screw holes towards each other as they were too far apart. It sucked and these suck also.

Cliff - September 18, 2012

(Council bluffs, IA)

Fit

Quality

Installation

Recommend

Easy as cake

Easy to install, straightforward function. It increased the throttle response immensely on my 07 R6(R). Saves weight and increases performance. Every bike needs these.

Sam - February 9, 2012

(STL, MO)

Fit

Quality

Installation

Recommend

Didn't fit just right

Good quality, but the holes did not line up right on both sides. I had to drill the hole wider to make it work... took a few mins and some metal drill bits.

Dan - January 23, 2012

(Wilmington , DE)

Fit

Quality

Installation

Recommend

Driven Block Off Plates

I purchased a set for my 2006 ZX10R and found that the holes were about 1mm too close together to fit properly. I had to use tools to widen one of the holes so that the screws could be inserted and center on the threads. Close, but no cigar. Pretty poor craftsmanship for something as dead simple as aluminum plates with two holes in them. On the upside, the rubber plug fit fine...

Sean T. - November 2, 2011

(Redwood City, CA)

Fit

Quality

Installation

Recommend

Drive Engine Block Off Plates

Installed them on my '03 R6. They fit perfectly. Very easy to install and eliminated the exhaust popping I was getting after installing a shorty slip-on.

John - May 17, 2011

(Pacific Northwest, WA)

Fit

Quality

Installation

Recommend

Driven Block Off Plates

Bought a set for my 2003 R6. Fit perfect and VERY easy to install. No more popping from my shorty can!

John - May 4, 2011

(PNW, WA)

Fit

Quality

Installation

Recommend

AIS block off plates

These plates are a good value for someone looking to install AIS block off plates on an FZ1. I looked at several more expensive plates and decided to go with these. I was very pleased. They fit well and quality is good.

Brent - September 28, 2010

(Escalon, CA)

Fit

Quality

Installation

Recommend

Driven - Engine Block Off Plates 2005 zx 636

Driven engine block off plates did not fit perfectly on 2005 ZX 636. Was told that these would fit perfectly at first glance it looked like a perfect fit but as soon as you start screwing in the screws you'll find out that the screws are rubbing against the plates and destroying your engine. After forcing it in and removing all necessary tubing it started to leak wasn't too please so removed it. The amount of time and effort put into removing the stock block off plates was not worth it. Only use if you’re serious about really converting your motorcycle for track use.

Aly - July 6, 2010

(San Diego, CA)