Emgo Carburetor Synchronizer

Carburetor Synchronizer

Product Images

Alternate Views

Email
Was $106.95 $90.91 You save $16.04 (14%)

Rating 4.60 of 5 (13 Reviews)

This Product Qualifies for Free Shipping

In Stock
Unavailable

Qty:

Product Information

Emgo Carburetor Synchronizer

Complete 4 carb kit:
  • Vacuum gauges
  • Hoses
  • Adaptors
  • Mounting plate
  • Instructions
  • Item # 21754
  • SKU #
  • Mfr. Part #

Product Reviews 1 - 13 of 13

Overall Rating: 4.60 of 5

(13 Reviews)
Read All Reviews Rate This Product
5
6
4
6
3
1
2
0
1
0
What Other Riders Are Saying...

Fit

Finish

Durability

Features

Cost Benefit

Worked Well But Directions STINK!

You need to cut the fuel lines and install the valves yourself, a little cheap there. The number 1 calibrator was off from factory, but easy enough to adjust yourself. At this price it should come in a nicer box for storage. Will not fit back in the box with the valves on it. Worked well enough after you play with a while and figure it out. Directions are pretty much non-existent, but what do you expect for something made in China?

Dean - October 1, 2015

(Milwaukee, WI)

Fit

Finish

Durability

Features

Cost Benefit

carb syncs

Worked really well for my multi cylinder bikes. Restrictors are so necessary to keep the needles toned down and get good readings. Being able to zero the gauges is oh so nice. Thanks for setting up this kit.

j knisel - April 14, 2015

(houston, TX)

Fit

Finish

Durability

Features

Cost Benefit

carb sync tool

Convenient having all the gauges mounted together. Quality piece. I own 2 street bikes and a Drag bike and will use this tool on all of them.

David - June 19, 2013

(Taftville, CT)

Fit

Finish

Durability

Features

Cost Benefit

EMGO Carburetor Synchronizer

I had just rejetted my carburators (2) and needed to rebalance them. I had read about a home made device on a forum using plastic tubing but that was totally unsuitable. I called the dealer to see what it would cost and was told it would be three times the cost of the EMGO vacuum tool. I purchased the EMGO and had the job done in about 15 minutes with no prior experience. It works great and came with all the extra's I needed!!

Tom - January 10, 2013

(Huntsville, AL)

Fit

Finish

Durability

Features

Cost Benefit

Great tool

I have always used mercury sticks until it was no longer available to buy. These by far are the best vacuum gauges as far as value goes in my mind after trying several other economy brands. I did learn that cutting the four lines in half and placing the turn screw valves in line really allows this tool to work best and stop fluttering. This really is a great tool and having the adjustment allows this to be used on all kinds of motors regardless of the vacuum power.

AB - January 8, 2013

(Brighton, MI)

Fit

Finish

Durability

Features

Cost Benefit

Good tool

The price was right and the free shipping even better. The gages did there job perfectly on my cafe bike project.

Steve - October 8, 2012

(Pittsburgh, PA)

Fit

Finish

Durability

Features

Cost Benefit

It serves it purpose

Had to get something fast to synch my TBs on my Ducati, at the time can't afford the electronic tool . . .It worked well

Carlos - August 31, 2012

(Miami, FL)

Fit

Finish

Durability

Features

Cost Benefit

Worked really well and it's a great price!

I was absolutely sick of spending more time with removing air bubbles than doing the sync. This sync worked flawlessly and saved me so much time compared to the liquid motion pro!! You have to dial in the restrictor valves (included), which only takes a few seconds. If you don't, the gauges will bounce all over the place. I'm very satisfied with it and I recommend it.

marc0011 - November 4, 2011

(Washington, DC)

Fit

Finish

Durability

Features

Cost Benefit

Sync'd

Can't beat price, even trying to put together from parts. Restrictor valves are a must, otherwise needle bounces over half gauge face. Permanently installed factory adaptors for repeat application. Sync'd to within 1/3psi. Draped gauge set over triple clamp and bungied. This is the way to go to sync your carbs.

Tapeworm - September 30, 2011

(Ogdensburg, NY)

Fit

Finish

Durability

Features

Cost Benefit

Works good !

I bought this set to sync the carbs on my 3 cylinder Triumph Sprint. After making some small adaptors from scrap tubing to fit the Mikuni carbs the Synchronizer worked just fine. Just remember you have to know which carb is connected to the throttle cable and adjust the others to it. On the Triumph, it's the center carb.

Jim - March 11, 2011

(Hesperia, CA)

Fit

Finish

Durability

Features

Cost Benefit

Gages work well

They fluttered on my ‘81 Goldwing until I damped them down using the included nylon valves. Then rock steady. The brass pipes fit the 5mm holes on the intake manifolds. None broke off. Very satisfied. Delivery was very prompt, even with the free shipping.

Arnold H. - November 29, 2010

(Boise, ID)

Fit

Finish

Durability

Features

Cost Benefit

M.L.S.W.

Works great does a good job at a fair price..

M.L. - April 19, 2010

(seattle, WA)

Fit

Finish

Durability

Features

Cost Benefit

Emgo Carburetor Synchronizer

I have a classic 1976 Honda CB750 which is very sensitive to being properly synchronized. I have used the liquid tube synchronizers in the past, but had problems with air bubbles getting in the lines, throwing off the results. The Emgo vacuum gauge style doesn't have the calibration problems, and gave me an accurate synch the first try. It was very easy to setup and perform the synchronization. My bike runs smooth.

Kevin - October 19, 2009

(Lomita, CA)
;
Back to Top