-- - $51.95

Tecmate Carbmate 4 Cylinder Adapter

This easy-to-mount & easy-to-use kit allows connection of CarbMate's 2 channels (tubes) to 4 carbs / throttle valves at once.

To fit:

Remove the CarbMate from its rubber protective holder, pass the tongue of the adapter through the end hole in the rubber holder so that the fold in the adapter plate rests on the lower edge of the hole in the holder. Then replace the CarbMate in the holder so that the tongue of the adapter is gripped between the housing of the SynchroMate & the bottom of the holder. The adapter can be left permanently mounted like this if preferred, or easily & quickly removed & subsequently remounted. The rubber tubes exiting the SynchroMate can be left at original length or cut down to suit if the 4-channel kit is to be permanently mounted.

How to use the 4 channel adapter kit on 4 carburetors / throttle valves- Preparation:

• There are normally three adjustable links between 4 carburetors
• For synchronizing purposes the carbs are split into two pairs
• Attach tube 1 to the leading or reference carburetor (the accelerator cable is attached to this carburetor)
• Attach tube 2 to the other in the pair containing the leading carburetor
• Attach tube 3 to the first carb in the second pair
• Attach tube 4 to the remaining carb

Synchronize in 3 easy steps:

• Select tubes 1 and 2 to synchronize the first pair of carburetors
• Select tubes 3 & 4 to synchronize the second pair of carburetors
• Finally, select tubes 1 and 3 to synchronize the two pairs of carburetors