Paul P
Lake Tahoe, CA
Moose Racing Aluminum Handguards
Solidly made, would be nice if they were pre-drilled for hand protectors, but maybe that's common for this type of product. Fit was a bit small, no matter how I mounted them, had to cut the knob off the end of the levers to get everything to fit. Have Cycra on my WR450f and they seem to have more room and better fit.
XR650Ldude
Small Town, AL
Very good no frills hand guards.
These went on my XR650L with a minimum amount of effort and work/look great. They came with absolutely everything I needed and even some things I didn't. There is no need to pay more for other brands with all the “bells and whistles” - funky bends, plastic parts bolted everywhere, fancy graphics, etc, etc. These get the job done nicely for a lot less. Mine have already saved me a broken clutch lever and probably a few broken fingers. I am a very discriminating accessorizor and am rarely as satisfied with a product as I was these. You will wonder how they sell them so cheaply.
Get the large protectors to go with them and you'll have a fine combination.
Ron
Dahlonega, GA
Great Product - Great Service
The product fit perfectly on both my sons KLX125L and TTR-225. The installation instructions where very easy to follow. These handguards will do the job when needed. The service, ordering, and delivery from Motorcycle Superstore was excellent.
Thunderdog
Canton, GA
Good product
Haven't hit any trees yet but look sturdy and no problem installing
Ralph
Huntsville, AL
Basic hand guards that get the job done and look great.
I like them. They came with all hardware and went right on my XR650L with very little fuss. The optional large brush guards fit well and the red ones matched my bike's Honda Red color well. I haven't “needed” them yet (and hope I never do), but there is every reason to believe they will perform just as advertized. The only gripe I have is that I would rather have not had to cut the ball ends off my levers, but I expected this and it was a small price to pay for such good protection.
I have found Moose Racing products to be top notch for the price and these are no exception. There is no reason to pay more for other brands that won't look or perform any better. Buy some now and stop putting it off.
justin
middlesex, NY
moose racing hand guards
One of the best investments I have made on my bike yet!!!
Bruce
charlotte, NC
Handgaurds
I am very happy with them they have already saved a clutch lever in a fall
RonMon
houston, TX
Good Handgards
The color matches my 2008 XT250 just fine. They fit good and were pretty easy to install once I figured them out (I resorted to reading the instructions). Moose is pretty proud of them $$$ but I am sure they will last a long time. They are strong -- I tested them when I dropped my bike within a week of installing them.
Tem McFaddin
Blythewood, SC
Moose Handguards
PERFECT!
jason
sherwood, OR
moose handguards
The only complaint I have is the fitment to my oversize pro tapers. Took a little customizing but seem to work well. I’ve only crashed once with them and they stayed in position.
adam
frostburg, MD
pretty good choice
I installed these today along with the moose plastics guards that go with them. Took about 15 minutes and they look good. 75 plus tax with the plastics guards. Kind of pricey but if they work I won't argue. I read a review on this site about them not having instructions with them. Yes this is very true but it's not rocket science.
Keith
medical Lake, WA
Moose Handguards
Bought these for my 08 KLR. Right side went on with no issues. Left side didn’t fit. Tried to bend the bar to fit it and it broke. Had to re-drill and hammer it into a workable solution. Would not but these again for my bike.
Mike M.
South Shore, MA
Everything you need...
...and nothing you don't. Keeps trees from smashing fingers. Good.
Susan
Oakland, CA
Black Handguards
A little tight to put on, but once on they fit well. Well made, but I haven't had a chance to test them yet.
Chip
B'ham, UT
Great if they fit
These are very nice handguards. Unfortunately they do not fit my application- a DR650 with an oversized Safari fuel tank, relocated turn signals, and aftermarket Spitfire windshield. There's just not enough space on the stock DR650 handlebar to mount these handguards.
Robert krieg
clarkston, AZ
Hand guards install
Bad/no instructions for the first time installer, what does one do with the nut and hose that comes with the guards? I installed two sets on a Honda 150r and Honda 150f. The clamp fit the o.d. of the handle bar BUT the 2 sleeves that go inside were too small and I ended up cutting and grinding the hose to take up the space? NO INSTRUCTIONS ON THE BACK OF PACKAGE. Yes, I did order them by phone so I could talk to a salesman on exactly what I needed.
Mike
Sheridan, Northwest
Handguards
Easy to install, excellent product for woods and trail riding. Looks great, got a lot compliments. I put the large handguard protectors on and together they make a great hand guard against sticks, branches, etc. even mud and roost. Saves hands and levers in crash. A+ in my book.
Big Rich
Mercerville, Prince Edw
Moose Aluminum Handguards
Easy to install and very durable. I was impressed with the thickness of the aluminum. I added the Moose plastic handguards which are nice on cold weather days to keep your hands warm. I have already crashed a few times on the trail and the handguards didn't bend or move. Summary: Good price and good quality.
jim
galt, FL
nice guards
Great looking and functional product. Easy install. (Be prepared to cut grips) Won't keep roost off your hands, but that’s OK. I am more concerned with trees. Nice also is they will fit fatbars when my steel stockers fold up. Definitely cheaper than endless bent or broken levers. And way cheaper than those fold-away unbreakable rigs.