Moose Racing Carbon Fiber Skid Plate

Item #:13901
$159.95
Rating 4.2 of 5 (5 Reviews)
Part for: 2006 KTM 450 SX Edit

Sorry, this item is no longer available. You may be interested in some of the items below

This item qualifies for FREE shipping

Item Description

Moose Racing Carbon Fiber Skid Plate

Protect your vital engine cases from Rocks and other debris with this lightweight Moose Racing Carbon Fiber Skid Plate. Lighter and stronger then aluminum and will absorb more sound and vibrations then aluminum.
  • Thick composite plates with many advantages over aluminum
  • The use of Kevlar gives our composite a longer fatigue life and greater tensile strength than aluminum
  • Composite plates are molded to the exact shape desired, making for a closer fit and more protective plate
  • Composite plates absorb vibration and do not amplify sounds like aluminum plates do
  • When hit hard, aluminum permanently deforms, vending frame tubes and slicing into water pumps
  • Composite plates will bounce back from hard hits and look great long after aluminum plates give up
  • Skid plates protect the side engine cases and the water pump in addition to the frame and the center case mud from building up on the engine
  • Mounting hardware included
  • Made in the U.S.A


**Closeouts are limited to stock on hand**

Related Items and Accessories

Moose Racing Replacement Mounting Clamp for Skid Plate

Moose Racing Replacement Mounting Clamp for Skid Plate

$7.95

(0 reviews)

Moose Racing Skid Plate Foam

Moose Racing Skid Plate Foam

$13.95

(0 reviews)

Customer Reviews for Moose Racing Carbon Fiber Skid Plate

Showing All 5 Reviews

Moose CF Skid Plate- DRZ400

  • Fit
  • Quality
  • Installation
  • Recommend

- June 26, 2012(Bonsall, CA)

Looks good and in the end I am happy with it. It is a real pain to install on a DRZ400 with the screws that are supplied. After getting frustrated went and bought longer screws and was much easier to install.

Moose CF Skid Plate

  • Fit
  • Quality
  • Installation
  • Recommend

- March 09, 2012(modesto, CA)

This thing works really well, I've smacked it pretty hard a number of times and it held up. The fitting was the worst though, I had to drill four new hole on the bottom to get it to bolt up. If the fitting was correct I would give this product a 100% rating.

Really good skid plate for yz450f

  • Fit
  • Quality
  • Installation
  • Recommend

- March 10, 2011(Canada, BC)

So I ordered this bad boy (actual product was made by e-line) and it fits great. On the yz450f it uses the 3 factory skid plate bolt holes for mounting. Super easy to install, looks great, and hopefully will be as tough as it looks. Only downside was price (what do you expect for a carbon composite material). As for durability only miles will tell. I rated this product all 5s even though it’s expensive and I can’t comment on durability yet. Would recommend this skid plate for sure!

150r moose skid

  • Fit
  • Quality
  • Installation
  • Recommend

- April 05, 2010(costa mesa, CA)

Very good coverage. Light as to be expected. Has hole for oil drain plug but take only minutes to remove to clean, etc.

Great when all was said and done

  • Fit
  • Quality
  • Installation
  • Recommend

- March 08, 2010(Metuchen, NJ)

You'll need to fiddle with this thing to get it on. Start installation by securing with the right front clamp. Tape clamp to the frame tube like they say in the install notes. Leave it loose. Then go to the rear and thread the original plate bolt loose before finishing with the left front. Tighten everything. The oil hole does not line up but I've heard that most plates will need to come off for an oil change anyway. This one too. Once you get it on right, it fits like a glove. Very nice.

Showing All 5 Reviews

Copyright© 1998-2013 Motorcycle Superstore Inc. All rights reserved.

Mini Cart

Subtotal

View Cart Checkout