fmf power up jet kit
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
shawn -
July 16, 2012(binghamton , NY)
Installed on my 2008 honda xr650l with a big gun evo slip on. Easy install fmf did their homework. Would reccomend it to anyone.
Powered up my 2009 Honda XR650L
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Bundaschlagen -
March 26, 2012(Pennsville, NJ)
I just installed this Jet Kit in my 2009 Honda XR650L, along w/ a Pro-Circut T4S Exhaust & a UNI Multi Stage Competition Air Filter. I think ALL 3 were FANTASTIC!!!
Better sound and throttle response
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Raymond Wright -
July 28, 2010(Mt. Crawford, VA)
Easy to install, not as much change in throttle response and power as expected. With jet kit it was noticeable. Biggest change in power was going to a 13 tooth front sprocket on my XR650L which only cost about 20 bucks.
Easy to install
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
R. K. -
July 08, 2010(Sanford, NC)
Needed this kit for aftermarket pipe and intake. Easy to install and provides the right air/fuel mixture for increased performance. Would recommend to anyone.
Combo with PB header and Q4 exhaust
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Rich -
April 19, 2010(East Wenatchee, WA)
A lean running bike makes a world of difference. After installing the jets header and pipe it felt like a different bike. DRZ400s is my bike of choice.
FMF - Power Up Jet Kit
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Peter Petit -
January 29, 2009(Fremont, CA)
WE enjoy it very much. It did increase his horse power on his Honda CRF250X
FMF Jet Kit
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Lance -
November 04, 2008(Anywhere, KS)
The kit is OK. Great for the money. In hindsight I would probably go on eBay and buy one of the kits that a machine shop had made. The instructions were great, but I have a Clymers book too and I did Dave Clausen's xr650l mods. Overall a solid buy.
FMF Power up jet kit for KLX 300
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
John -
May 15, 2008(Christchurch, CO)
The jets made the difference, crisper, cleaner running, boosted bottom end and will now rev out to the limit. Also put on the aftermarket header and T4 tail pipe, it all helped. I did one thing at a time, 1st the tail, then the header and last the jet kit, each time an improvement, but I think the jets made the most improvement overall. JRC NZ
FMF Power Up Jet Kit
-
Fit
-
Finish
-
Durability
-
Features
-
Cost Benefit
Tammy Ellingson -
December 10, 2007(Jackson, WY)
Waste of my time! Tried everything to make it work! High elevation and my 2005 CRF250R did not like the change. Returned to stock, ran great, some things should be left alone. I learned my lesson! (Honda should know what they are doing by now).
