Dynojet Power Commander VUsing valuable knowledge learned from the Power Commander III, Dynojet introduces the more capable Power Commander V, a premier EFI tuning system. Retaining the famed user-fri
Closeout up to 10% off
Vance and Hines FuelPak Fuel Management System A must have addition to your Vance & Hines exhaust, the FuelPak Fuel Management System plugs into your ECU to automatically adjust the air/fuel ratio for
Closeout up to 68% off
Dynojet Power Commander III USB The original and gold standard, the Dynojet Power Commander III USB plugs into almost every fuel injected motorcycle for quick and easy fueling adjustments. Make change
Vance & Hines Fuelpak FP3The next logical progression in fuel management software, Vance & Hines has ditched the laptop and replaced it with the smart phone. Incredibly easy to use, you simply plug th
Cobra Fi2000 PowrPro Tuner The tuning ability of modern EFI systems is impressive; almost too impressive. Not only can you alter how your bike runs, but these changes can be easily just as bad as they
Dynojet Auto Tune for Power Commander V "Auto Tune" kits are available that include Wide Band O2 sensors and control boxes. It will plug directly into the PC V and allow automatic fuel adjustments A
Cobra Fi2000R Fuel Processor Nearly every fuel-injected motorcycle and ATV can benefit with the installation of the Fi2000R from Cobra USA This small, fool-proof device makes fuel-injected motorcycle
Dynojet Stage 1 Jet Kit Intended for motorcycles with a stock engine using the stock airbox, air filter and stock pipe. Stage 1 kits are fully adjustable to allow the use of a well designed aftermarke
S&S Cycle Shorty Super "E" Carburetor Kit
Super E has a 1 7/8" (47.6mm) throat at the butterfly and a 1 9/16" (39.6mm) venturi and is recommended for use on Big Twin or Sportster engines up to 100-
Economy Carburetor Repair Kit
Economy Carburetor Repair Kit
Each kit contains all necessary gaskets, O-rings and jets to rebuild one OE carb
Kits come with needle and seat if removeable on OEM
$79.95 - $129.95
$59.99 - $110.46You save up to $19.96 (25%)
Cobra Jet Kit
Designed by Dynojet for Cobra
Carburetor recalibration kits tuned specifically for cruisers using Cobra Boulevard exhaust and stock or aftermarket air filter
K&L Carburetor Repair Kit Each carburetor repair kit from K&L contains all necessary gaskets, O-rings and jets to rebuild one OE carb **Note: Polaris - use with round slide VM34 Mikuni carburetor.
Vance & Hines Carburetor Jet Kit
Carburetor Jet Kit from Vance & Hines
Designed to recalibrate OEM stock carburetors for use with Vance & Hines exhaust systems
Include complete needle ass
Wiseco Fuel Management Controller
Wiseco’s new Electronic Fuel Injection Controllers are simple and easy to use. With the push of a button, you can easily adjust fuel flow for modificat
Dynojet Recalibration Kit
Recalibrate your stock Keihin CV carb to make full use of the performance potential
Includes the jets, needles, instructions, etc. necessary to recalibrate stock en
S&S Cycle Super "G" Carburetor
The Super "G" carburetor has a 2-1/16" Throat at the butterfly and a 1-3/4" venturi and is recommended for use on 90-cubic-inch and larger high-performance and modifie
Moose Racing Carburetor Vent Line This quality made fuel line will not harden or crack Available in 1/8" i.d. Carb vent line comes in 5-foot lengths
Dynojet Power Commander FC The Power Commander FC is a new plug-n-play fuel management device pre-programmed with Make/ Model specific maps. In addition the Power Commander FC has the added ability to
Moose Racing Fuel Line
This quality made fuel line will not harden or crack
Available in 1/4", 3/16", and 5/16" i.d.
Fuel line available in 3-foot lengths
Choice of clear or black
Dynojet Power Vision The quickest and most powerful flash tuner on the market The sophisticated, yet easy-to-use, 3.5" full-color touch-screen display mounts to handlebars with integrated Amps 4-hole
Cobra Fi2000R ARB Fuel Processor California-legal version of the Fi2000R (California ARB E.O. no. D-633-1) Nearly every fuel-injected motorcycle and ATV can benefit with the installation of the Fi200
Motion Pro Quick-Disconnect Dual Shut-Off Coupling
Dual shut-off valves allow fuel to flow when connected; when disconnected, fuel will not flow from either line
Ideal for fuel tanks equippe
S&S Cycle Super "E" Master Rebuild KitCarburetor master rebuild kit. Fits Super E gas carbs for Harley-Davidson motorcycles. Includes a body rebuild kit, all new fasteners, springs, idle mixture screw
K&L Float Bowl O-Rings And Gaskets
Need a Gasket or O-Ring for your carburetors float bowl? Look no farther K&L has what you need to rebuild, rescue, and/or refurbish your carburetor.
Sold in packs
Installed FP3 with power duals and monster rounds on a 2015 CVO Road Glide Ultra. After some time on phone with techs we got it tuned in right. Big difference from stock, and sounds great. Simple install.
Brian (San Francisco, CA)
I recently bought the Cobra FI2000 ARB (California model) for my 2014 Yamaha Bolt R-spec. What a disappointment. Should have bought the non-legal fuel controller. It helped a little with throttle response but the backfiring was worse . The box says “virtually eliminates backfiring”. Not even. I lost 10-15 mpg for slightly better performance. Not worth it.
Gladius Power Commander V
Adds instant power and is super simple to upload maps from my laptop. I paid 119.99 for it :)
wiseco fuel manager
works very well
Used on a KLR650.
Power increase was nominal but fuel efficiency was increased and helped eliminate "popping" with my aftermarket Vance and Hines exhaust.
Very user friendly with easy to follow instructions. You dont have to completely remove the carb for this upgrade but you really should so it can be properly cleaned at the same time.
John R. (Chicago, Illinois, IL)
Did the stage 1 upgrade on my 2007 Night Rod Special which consisted of exhaust, hi-flo air filter and fuel manager. Installation was a bit challenging considering the front and rear fuel injector connections are directly in between the jugs. A set needle nose pliers will speed up the process. Factory settings from Cobra are preset at 2-2-2. Still ran lean so I bumped all 3 pots to 4-4-4. No more lean condition, bike runs/performs fine. Decent product!
Getting the right amount of fuel to your engine is the most important element in motor performance. Whether you ride the highways or the local streets fuel system parts are crucial for a strong a healthy engine. At Motorcycle Superstore, we have all you need to get the most out of your fuel systems with a massive selection from all of the major cruiser performance brands. From jet kits, carburetors, reeds, injection mapping to CDI boxes, we’ve got you covered. Find the right fuel system parts that fit your bike with our bike parts finder. So if you want to get more juice out of your bike, make sure your engine is being fed with the right amount fuel with cruiser fuel system parts from Motorcycle Superstore.