Moose Racing Carbon Fiber Skid Plate

    Moose Racing Carbon Fiber Skid Plate

    Product Images

    Alternate Views

    X
    X
    Email
    $159.95

    Rating 3.92 of 5 (6 Reviews)
    This Product Qualifies for Free Shipping

    Please Select a Size

    Please select your bike

    Please select a Bike

    Qty:

    Add to Cart

    Product Information

    Moose Racing Carbon Fiber Skid Plate

    Protect your vital engine cases from Rocks and other debris with this lightweight Moose Racing Carbon Fiber Skid Plate. Lighter and stronger then aluminum and will absorb more sound and vibrations then aluminum.
    • Thick composite plates with many advantages over aluminum
    • The use of Kevlar gives our composite a longer fatigue life and greater tensile strength than aluminum
    • Composite plates are molded to the exact shape desired, making for a closer fit and more protective plate
    • Composite plates absorb vibration and do not amplify sounds like aluminum plates do
    • When hit hard, aluminum permanently deforms, vending frame tubes and slicing into water pumps
    • Composite plates will bounce back from hard hits and look great long after aluminum plates give up
    • Skid plates protect the side engine cases and the water pump in addition to the frame and the center case mud from building up on the engine
    • Mounting hardware included
    • Made in the U.S.A


    **Closeouts are limited to stock on hand**
    • Item # 13901

    FitmentView All

    Honda Models

    • CR250R: 2002 - 2007
    • CRF150R: 2007 - 2009, 2012
    • CRF150R Expert: 2008 - 2009, 2012
    • CRF250R: 2004 - 2012
    • CRF250X: 2004 - 2009, 2012
    • CRF450R: 2005 - 2010, 2013
    • CRF450X: 2005 - 2009, 2012

    Kawasaki Models

    • KLX400: 2003 - 2004
    • KLX450R: 2008
    • KX250F: 2006 - 2008
    • KX450F: 2006 - 2008

    KTM Models

    • 144 SX: 2008
    • 150 SX: 2009 - 2010
    • 150 XC: 2010
    • 200 EXC: 2010
    • 250 SX: 2004 - 2011
    • 250 XC: 2006 - 2008, 2011
    • 250 XC-F: 2008 - 2009, 2011
    • 250 XCF-W: 2008 - 2010
    • 250 XC-W: 2006 - 2009
    • 300 XC: 2006 - 2009
    • 300 XC-W: 2006 - 2008
    • 350 EXC-F: 2012
    • 350 SX-F: 2011 - 2012
    • 350 XCF-W: 2012
    • 450 EXC: 2008 - 2010
    • 450 SX-F: 2008 - 2012
    • 450 XC-F: 2008 - 2009
    • 505 SX-F: 2007 - 2008
    • 505 XC-F: 2008 - 2009
    • 530 EXC: 2009 - 2011

    Suzuki Models

    • DR-Z400: 2000 - 2007
    • DR-Z400E: 2000 - 2007
    • DR-Z400S: 2000 - 2009, 2012
    • DR-Z400SM: 2005 - 2009
    • RM-Z250: 2004 - 2006

    Yamaha Models

    • WR250F: 2006 - 2008
    • WR450F: 2007 - 2009
    • YZ250: 2005 - 2012
    • YZ250F: 2006 - 2008

    Product Reviews Showing All 6 Reviews

    Overall Rating: 3.92 of 5

    (6 Reviews)
    Read All Reviews
    Rate This Product
    5 Star
    2
    4 Star
    1
    3 Star
    1
    2 Star
    2
    1 Star
    0
    What Other Riders Are Saying...

    Fit

    Quality

    Installation

    Recommend

    2002 Honda CR250R

    This skid plate is built very well, is very light, and looks great. The installation on the other hand was horrible. The front bolts went in perfect. The rear bolts were about 1/4 inch too short, and the aluminum bar that the bolts thread into sat on the welds of the lower frame rail, which made the longer bolts that I had to buy go in crooked and the bolt heads don't sit flush on the skid plate. If I were to buy another skid plate, I would buy another Hyde Racing. I had one on my Husqvarna. It fit perfect, bolted right on, was EXTREMELY durable, and felt even lighter than the carbon fiber. I ordered this one because Hyde was currently out of stock.

    Spence - December 05, 2013

    (Saginaw, MI)

    Fit

    Quality

    Installation

    Recommend

    Moose CF Skid Plate- DRZ400

    Looks good and in the end I am happy with it. It is a real pain to install on a DRZ400 with the screws that are supplied. After getting frustrated went and bought longer screws and was much easier to install.

    Mark - June 26, 2012

    (Bonsall, CA)

    Fit

    Quality

    Installation

    Recommend

    Moose CF Skid Plate

    This thing works really well, I've smacked it pretty hard a number of times and it held up. The fitting was the worst though, I had to drill four new hole on the bottom to get it to bolt up. If the fitting was correct I would give this product a 100% rating.

    robert - March 09, 2012

    (modesto, CA)

    Fit

    Quality

    Installation

    Recommend

    Really good skid plate for yz450f

    So I ordered this bad boy (actual product was made by e-line) and it fits great. On the yz450f it uses the 3 factory skid plate bolt holes for mounting. Super easy to install, looks great, and hopefully will be as tough as it looks. Only downside was price (what do you expect for a carbon composite material). As for durability only miles will tell. I rated this product all 5s even though it’s expensive and I can’t comment on durability yet. Would recommend this skid plate for sure!

    Yz450f rider - March 10, 2011

    (Canada, BC)

    Fit

    Quality

    Installation

    Recommend

    150r moose skid

    Very good coverage. Light as to be expected. Has hole for oil drain plug but take only minutes to remove to clean, etc.

    J J - April 05, 2010

    (costa mesa, CA)

    Fit

    Quality

    Installation

    Recommend

    Great when all was said and done

    You'll need to fiddle with this thing to get it on. Start installation by securing with the right front clamp. Tape clamp to the frame tube like they say in the install notes. Leave it loose. Then go to the rear and thread the original plate bolt loose before finishing with the left front. Tighten everything. The oil hole does not line up but I've heard that most plates will need to come off for an oil change anyway. This one too. Once you get it on right, it fits like a glove. Very nice.

    Bill - March 08, 2010

    (Metuchen, NJ)
    Back to Top