Paul (La Pine )
I have a Disabled Hunter Permit in Oregon, which allows me to hunt from a vehicle. Scoffed at during my fit years... but since my mobility loss due to stroke... it gives me the opportunity to continue to participate in hunting. I have a 2015 Polaris Sportsman Ace 570. It has doorway tubing "loops" that extend to the front of the seat. I had removed the left loop for easier entry/exit. I mounted the ALL RITE UTV /Gun Holder on the outside of the right loop, on the short vertical front section of the loop. That location places the rifle well below my shoulder, and protected between the front and rear fenders. I used a 1/2"x1/2"x2" piece of scrap for a filler under the U-bolts for mounting on the 1" tubing. As with any rubber gun rack, it will scuff the finish when trail dust gets in there... so I got loose fitting cloth sleeves for both scoped and non-scoped rifles.
PATRICK (murphys )
Seems to hold tight and not come loose on rough roads.
Jim (Cortez )
It's a good stout rack. Installed on a Tyrex. Made my own mounts. The ones shown looked a little flimsy and fairly expensive.
Mr maurice (french lick )
genuine moose consumables keep them in the icebox until needed
Jerald (Marietta )
The parts were as expected and the service was Great !!!!
Robert (Littleton )
Installed rack on Yamaha Rhino. Mounting brackets provided a good solid support for the rack. Easy to install.