1. Parts

2007 Yamaha Royal Star 1300 Venture Parts

2007 Yamaha Royal Star 1300 Venture
Tire Size:
Front: 150/80-16, Rear: 150/90-15
Spark Plug:
DPR8EA-9
Battery:
YTX20L-BS
Stock Chain/Belt:
NA
Stock Gearing:
Front: NA, Rear: NA
Oil Filter:
KN-303
Select Your Ride: Go

Top Selling Parts for your 2007 Yamaha Royal Star 1300 Venture

Grid List
BikeMaster
Oil Filters
$2.76 - $9.32
You save up to $2.33 (20%)
  • Black
  • Chrome
(48)
Bikemaster Oil Filters Keep your street bike, dirt bike, ATV, cruiser, or chopper running with some preventative maintenance. Change your oil and oil filter to get all the power and life out of your machine. Made in the same factory as many OEM filters Filters exceed OEM standards for filtration and service life High-quality materials allow for use with standard and synthetic oils Low internal resistance allows for maximum oil flow Internal check valve prevents oil drain down and dry starts Tough steel casing and base plate, with high-quality seal **Note: Item is bike specific and may vary from image shown.
Kuryakyn
Magnum Quick Clamps
$20.39 - $39.09
You save up to $6.90 (15%)
  • Chrome
  • Black
(5)
Kuryakyn Magnum Quick Clamps Stainless steel construction for superior strength Hinged design for fast simple installation No more stripped bolt heads All clamps have a 1/2" hole for peg mount
Slip Streamer
Replacement Windshield
$30.99 - $124.99
You save up to $20.96 (14%)
(0)
Slip Streamer Replacement WindshieldMade of crystal clear 3/16" Lucite Distortion-free, optically correct and break resistant Precision crafted for a perfect fit Made in the U.S.A. **Note: Product is bike specific and may vary from image shown.
EBC
Double-H Sintered Brake Pads
$22.22 - $64.20
You save up to $8.75 (11%)
(262)
EBC Double-H Sintered Brake PadsConsistently rated as one of the best, the EBC Double-H Sintered Pads are some of the grippiest street legal motorcycle brake pads you can buy. Named after the highest friction rating available, HH, these EBC brake pads are perfectly suited for hard street use. The sintered copper alloy construction is built for long life and heat and work well in a wide variety of riding conditions.Features:The EBC Double-H Sintered Metal Pad features the HH friction rating - the highest in the industry Provides maximum brake effect and last twice as long as organic pads Formulated to eliminate brake noise and fade ECE R90 Approved If your bike has two calipers you must order two sets**Fitment Notes:BMW K1200 LTs manufactured after 11/00 use 2001 pads BMW R1100S 00-05 pads are for bike without integrated ABS Kawasaki Concours come complete for one rotor; order two sets**Closeouts are limited to stock on hand**
Yuasa
Maintenance Free Battery
$24.03 - $135.25
You save up to $27.70 (16%)
  • Black
(106)
Yuasa Maintenance Free Battery Special absorbed glass mat battery eliminates water loss, permitting the battery to be permanently sealed once it is filled with acid; Acid Pak included Truly the world's finest install it and forget it motorcycle battery Because of its lead calcium design, the AGM battery will hold its specific gravity more than three times longer than conventional lead antimony types. This means much longer periods between charges when the battery is used in a standby mode, like winter storage Once filled with acid from its special packs, the AGM battery is virtually maintenance free. It's totally sealed and all of the acid is absorbed in the special plates and separators, so there is no need to worry about acid leaks on valuable vehicle parts and accessories 12 volt
Custom Dynamics Knight Riderz Light Bars Light up the night with 12 high-power dual intensity LEDs. In running light mode the LEDs sequence from side to side in a "Knight Rider" sequence. When the brake is applied the LED will flash for 5-6 seconds then go to a solid state until the brake is released. Both modes, running and brake, have been designed to create the maximum visibility. The unit is extremely easy to install with 3M tape and a 3-wire color coded electrical installation. Simply connect the Black wire to any ground wire, the Red wire to your existing brake light wire and the Blue to an existing running light power source. Works with any 12V DC electrical system without the need for load equalizers or resistors. Features: Features 12 super bright LEDs 3M double-sided tape for easy mounting 3-wire color coded easy-to-follow electrical installation "Knight Rider" side-to-side sequenced running light. Flashing brake alert Works with any 12V DC system No load equalizers or resistors required Dimensions: 4.7"L x .7" W x .7"H **Note: Knight Riderz Light bars can be wired independently, for example: If you only want to use the running light function simply cap off the brake light wire If you only want to use the brake light function simply cap off the running light wire If you want to use the sequential function as the a brake light instead of a running light then connect it to your brake light wire and cap off the Knight Riderz brake light wire.
VIDEO     
BikeMaster
TruGel Battery
$25.56 - $164.76
You save up to $41.19 (20%)
  • Blue
(167)
BikeMaster TruGel Battery BikeMaster has supplied a battery with undeniable reliability, durability, and safety by incorporating Nanogel technology. This technology provides a vibration and shock resistant battery that doesn't leak acid when cracked. Whether you are using this in your powerful cruiser motorcycle, rugged atv, speedy sport bike, or dirt bike this battery is design to remain safe and reliable in every condition. Only Air shippable battery on the market Gel electrolyte powersports batteries Has a much longer storage life on the shelf or in the bike Resists vibration and impacts which damage regular wet batteries Works better at lower and higher temperatures than a wet battery Won't leak like a wet battery, even if the case cracks Can be installed at an angle Has a life span that can be up to twice that of a wet battery Maintains contact with all of the plates, all the time, giving more cranking power and longer life Will not sulfate like a wet battery Maintenance free 2 year manufacturer's warranty
Yuasa
High Performance Maintenance Free Battery
$89.60 - $133.59
You save up to $27.36 (16%)
  • Black
(48)
Yuasa High Performance Maintenance Free Battery Absorbed Glass Mat (AGM) Technology is an advanced battery design used in Yuasa's Maintenance Free Batteries that eliminates water loss. So you'll never need to fill it with water or check the acid level. Long Life Because of its lead calcium design, the AGM battery will hold its specific gravity more than three times longer than conventional lead antimony types. This means much longer periods between charges when the battery is used in a standby mode, like winter storage. Sealed, Non-spillable The AGM battery is virtually maintenance free. It's totally sealed and all of the acid is absorbed in the special plates and separators, so there is no need to worry about acid leaks on valuable vehicle parts and accessories. High Performance This new generation of batteries delivers higher cranking amps for vehicles that require extra starting power. Additional cranking amps make these one of the most powerful batteries on the market. 1 Year Manufacturers Warranty
K&N
High Flow Replacement Air Filter
$28.99 - $151.26
You save up to $26.69 (14%)
  • Black
(276)
K&N High Flow Replacement Air Filters Street bike, off-road, ATV UTV, and cruiser, K&N Air Filters are a long running industry standard. Known as much for their durability as their power increase, K&N High Flow Replacement Air Filters work the same no matter what the application or conditions are. And as K&N says 'With proper cleaning and care, K&N High Flow air filters will last the life of your engine'. Features: OEM replacement filters designed to fit inside the factory airbox Larger surface area over foam filters, offers longer service intervals in dusty conditions Four layers of premium cotton gauze provides outstanding filtration Designed to increase horsepower and throttle response Developed with a sealing bead precise to its application Epoxy-coated aluminum wire mesh incorporated into a back-fire screen to protect the filter element Cleans up easily with K&N filter cleaners **Notes: BMW K1200S, K1200GT (2 required) Ninja 600 '93-97 for Non-California models only 2011 Kawasaki Z1000 vin after ZRT00DE010766 use sku 438864 2011 Kawasaki Z1000 vin before ZRT00DE010765 use sku 309655 **Closeouts are limited to stock on hand**
BikeMaster
Brake Pads
$15.16 - $34.36
You save up to $8.59 (20%)
(65)
BikeMaster Brake PadsThe precise proportions of Kevlar, Twaron, Ceramic, and low metal content makes the BM150 brake pad compound unique with a broad range of performance features. The result of over a decade of structured dyno testing, customer feedback, and real world abuse and with over a million sets sold worldwide, BikeMaster brake pads have proven their worth with consistent power and exceptional feel at an unbeatable price.Years of constant research and brake dyno testing Yielding the latest technology in pad performance Made at a factory that supplies Japanese OEM's The highest quality and perfect fit Formulated for high performance stopping power Long service life Excellent feel and feedback Superior fade resistance Reliability and a name you can trust Sold as a set
VIDEO     
BikeMaster
Lithium Ion Battery
$62.68 - $286.68
You save up to $33.27 (10%)
  • Black
(0)
BikeMaster Lithium Ion Battery Lithium Ion technology is revered for its light weight, low self-discharge rate and long storage life. BikeMaster has taken advantage of all these things with its new Lithium Ion Battery. Available in fitments for just about any kind of motorcycle, ATV and UTV, this BikeMaster battery gives you consistent starting power for whatever application you may have. And don't worry about the fact that Lithium Ion is traditionally smaller in size compared to Lead batteries, BikeMaster provides foam padding to make installation easy. The most advanced high-power Lithium Ion Phosphate battery technology from BikeMaster Ultra high cranking amps from a super lightweight battery. Only 1/3 the weight of a lead acid battery Cylindrical cell with energy storage welding technology for higher output Built-in charge and equalizing protection board, preventing battery from over-charging Remarkably low self-discharge for extended storage periods up to one year Suitable for low temperature environments More than twice the service life of conventional lead acid batteries Superior vibration-resistant construction allows multi-directional installation without damage No corrosive liquids and no toxic heavy metals make BikeMaster Lithium Ion batteries environmentally friendly Two year warranty
Shorai
LFX Battery
$98.96 - $308.66
You save up to $34.29 (9%)
  • Black
(49)
Shorai LFX Battery Shorai offers the next generation of high-powered, long-lasting motorcycle and ATV batteries that is sure to leave the others behind. The Shorai LFX is the first in the industry to offer prismatic cells that deliver extreme-rate Lithium Ion cold-cranking amps for your motorcycle while maintaining a lightweight and compact design. Built to withstand extreme temperatures, the LFX doesn't contain any liquids, so there's no hassle of adding water or dealing with corrosive battery acid that can damage your ride. Sportbikes, ATVs, UTVs or adventure bikes - Shorai LFX has got a battery that will power your machine and accessories mile after mile. Ultra light.  One-fifth the weight of lead-acid batteries on average Zero sulfation, for longer service life Holds unloaded charge for one year without maintenance Military spec carbon composite case Faster cranking for better starts No explosive gasses during charge, no lead, no acid Environmentally friendly Two-Year manufacturer warranty Size and shape may vary **Note:The Shorai LFX battery may not be used with a lead-acid battery charger with an automatic desulfation mode that cannot be disabled. We recommend the Shorai LFX Battery Charger to properly charge and perform cell diagnostics on this high performance battery.
VIDEO     
K&N
Performance Gold Oil Filter
$5.99 - $13.99
You save up to $2.96 (17%)
  • Black
(163)
K&N Performance Gold® Oil Filter Similar to their air filters, K&N Performance Gold Oil Filters are known for their longevity and high performance. Made to fit applications ranging from sport bikes to cruisers to dirt bikes and ATVs, the improvement in oil flow and filtration is the same regardless of the motor type. For those who like their motor to last, K&N is a sure bet. High-Flow Rate K&N oil filters use resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration. High filter flow rates are important in racing vehicles where heavier grade oil is used and the oil is pumped much faster than in a standard vehicle. When the engine is circulating oil at high GPM rates, the high-flow oil filter helps reduce the loss of pressure through the filtering process. Compatible with the Latest in Synthetic Engine Oils K&N oil filters are ideal for high-end synthetic motor oil. Synthetic motor oil is said to offer improved flow performance at cold temperatures while providing superior protection against thermal degradation. Warranty These oil filters are covered by a limited manufacturer warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals. Features: Resin-impregnated filter media provides maximum filtering surface for contaminant removal Internally lubricated gasket provides positive seal while allowing easy on and off of filter Rolled threads provide extra protection against stripping Designed for today's high-performance synthetic oils, unaffected by racing fuels Check valve prevents oil drainback and dry starts New pressure relief valve Canister style oil filters feature a17mm wrench nut for easy service (drilled for safety wire security) 50% thicker wall construction, stronger inner core, heavy base plate with double rolled seal Meets or exceeds OEM flow rates TUV endorsed and TUV factory production monitored **Note: Does not include new o-rings BMW models R100 without oil cooler
BikeMaster
Sintered Brake Pads
$17.56 - $36.76
You save up to $9.19 (20%)
(35)
BikeMaster Sintered Brake PadsAvailable in a wide range of applications from street, dirt, sport touring, and cruiser, BikeMaster sintered brake pads are the ideal OEM replacement part. Providing better power, modulation, and road feedback, BikeMaster sintered pads offer great value in a long lasting package. Utilizing the latest technologies in design and manufacture. Years of research and brake dyno testing resulting in our selection of the sintered materials Special metallic and other compounds, fused together with great heat and pressure Yielding increased performance, heat resistance, and a longer life than our everyday pads Designed for heavy duty use, sintered pads are used on most O.E.M. high performance machines These pads will satisfy the most demanding riders, offering powerful stopping force and a good feel Sold as a set (One rotor equals one set)
VIDEO     
EBC
Pro-Lite Front Brake Rotor
$58.96 - $228.80
You save up to $31.20 (12%)
(18)
EBC Pro-Lite Front Brake Rotor Lighter and with a stronger feel over OEM, the EBC Pro-Lite Rotor makes for an easy upgrade when it comes to braking power. Additionally, Pro-Lite front brake rotors display an increase in longevity under hard use. The EBC Pro-Lite Brake Rotor is made with forged aluminum center hubs, high-friction billet steel rotor rings and sturdy riveted construction Excellent choice when upgrading or replacing OEM brake rotors Complete bolt-on and go rotor assemblies **Notes: Bikes with left or right option are universal side to side, two are required for a complete set of front rotors Kawasaki ZRX1200 '01-05 & ZX-12R '00-03 are for SD-System rotors BMW R850GS/C '94-01, R1200C '98-05, K1200LT '98-99 & K1200RS '97-01 include rotor ring only Triumph T100 floating rotor conversion available on MD601LS and MD601RS. Please call customer service for specific details. Product image may vary depending on make, model and year
Ballistic
EVO2 Battery
$109.95 - $289.95
  • Red
(54)
Ballistic EVO2 BatteryWeight is important; where it is located on your bike and how much, can have a huge effect on more components than you'd care to think about. Keeping this in mind, Ballistic set out to create the lightest motorcycle and ATV battery possible and yet still retain and exceed the starting power that standard lead batteries put out. To accomplish this, each EVO2 uses the latest, state of the art lithium ferrous energy storage technology available to provide you with a smaller, higher energy, lightweight motorcycle battery. Made by hand in the USA using computer designed custom proprietary cells, cases, and hardware. The end result is that Ballistic Performance Component Batteries will provide more energy out of a smaller package while requiring almost no regular maintenance and under most conditions a longer service life than existing lead acid batteries.**Note: Because The EVO2 is performance-first, the Ballistic EVO2 battery application guides are based strictly on battery power and functionality, not size or terminal location. Use the supply foam in the packaging to make up the difference between the size of the battery and the size of the OEM battery box.Features:Up to 80% smaller than the stock battery Up to 10lbs Lighter than the stock battery Service life of over twice a lead acid in similar conditions Industry leading 3 year warranty Designed, developed, and assembled in the USA Hard mounted brass terminals for a direct replacement installation Completely "dry" technology so batteries can be mounted in any direction Non-toxic, and recyclable Applications for powersports vehicles from 50cc - 2300cc Tested extensively by professional race teams Impact and water resistant No special charger required No trickle charger required, loses only 10% of charge over a year of static use These batteries operate very differently than lead acid type, please watch the video for more detailsNeed more info? Check out the blog: Ballistic EVO2 Battery
VIDEO     
BikeMaster
Maintenance Free Battery
$29.99 - $128.99
You save up to $13.96 (9%)
  • Black
(28)
Bikemaster Maintenance Free BatteryReady for almost any application, the BikeMaster Maintenance Free Battery is just as suitable for high performance sport bikes as it is for utility ATVs. Once filled, strong amps and cranking power is provided start after start, year after year. Includes a seal that is placed across top of battery to create a sealed, spill proof battery Never needs refilling but a periodic charge is recommended 1 year manufacturer's warranty
EBC
Organic Rear Brake Pads
$28.16
You save $3.84 (12%)
(57)
EBC Organic Rear Brake PadsMade in EBC's own factory in Bristol, England, the EBC Kevlar® series has now been renamed NAO series or Non-Asbestos Organic, although they still use the famous Dupont Kevlar® fibre in conjunction with other high tech fibres that have come on the market. The NAO series are a superb all round value-for-money replacement for all levels of motorcycle and are still extremely popular with many riders who prefer the "feel" of organic pads.NAO series are fully TUV tested and KBA certified and conform to the new ECE R90 brake regulations. EBC is at the forefront of this technology and will be the first on the market to offer Reg. 90 approved pads and packaging. Most EBC organic pads have expansion grooves which reduce noise and prevent cracking. The aramid fibre compound with non-ferrous particles helps to prevent surface "scorching" under load.**Note: Item may vary from image.**Closeouts are limited to stock on hand**
EBC
Organic Front Brake Pads
$26.40 - $32.56
You save up to $4.44 (12%)
(45)
EBC Organic Front Brake PadsMade in EBC's own factory in Bristol, England, the EBC Kevlar® series has now been renamed NAO series or Non-Asbestos Organic, although they still use the famous Dupont Kevlar® fibre in conjunction with other high tech fibres that have come on the market. The NAO series are a superb all round value-for-money replacement for all levels of motorcycle and are still extremely popular with many riders who prefer the "feel" of organic pads.NAO series are fully TUV tested and KBA certified and conform to the new ECE R90 brake regulations. EBC is at the forefront of this technology and will be the first on the market to offer Reg. 90 approved pads and packaging. Most EBC organic pads have expansion grooves which reduce noise and prevent cracking. The aramid fibre compound with non-ferrous particles helps to prevent surface "scorching" under load.**Notes: Item may vary from image Fits BMW R80 upto 09/80 Following bikes require 2 sets: Burgman 650 '03-09, Honda CBR600F Hurricane FLHXXX and Tri Glide Trike are front fitment only Sold as pair, I.E. if your bike has two calipers then order two CM450 C (Custom) had a mid year change for VIN's under CM001211 select the size "Early" for VIN's over CM001212 select the size "Late" **Closeouts are limited to stock on hand**
Kuryakyn
ISO Pegs with Offset Mounts
$110.49 - $118.99
You save up to $21.00 (15%)
  • Chrome
(22)
Kuryakyn ISO Pegs with Offset Mounts These highway pegs utilize our unique offset mount to allow riders a range of adjustment not possible with other clamp-on style highway pegs. The offset can be rotated 360º in a 4" diameter circle to accommodate tall, short, or average height riders. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. These pegs offer an incredible amount of adjustability Entire assembly can be moved up or down on the engine guard or frame tubes Recommended for use on any bike that has 1 1/4" dia. engine guard or frame tube Sold in pairs Made in U.S.A.
BikeMaster
AGM Platinum II Battery
$19.96 - $133.56
You save up to $33.39 (20%)
  • White
(27)
BikeMaster AGM Platinum II Battery Once filled and sealed, the BikeMaster AGM Platinum II Battery provides strong cranking power and long life. Coming in fitments for both dirt bikes and street bikes, the AGM Platinum II is suitable regardless if you are concerned about racing performance or long term durability. Permanently sealed after filling means it's maintenance free and non-spillable with no need to constantly check or add water Greater cold cranking amps Longer service life Resists sulfation 1-year manufacturer's warranty
HiFloFiltro Oil Filter The Hiflofiltro - Thai Yang Kitpaisan factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963. With the experience of more than four decades, constant research and development and modern production facilities HiFloFiltro manufactures some of the best quality filters in the world. To achieve and ensure the consistency of our high quality, HiFloFiltro use only premium quality materials from well known makers: Steel from Toyota Tsusho and NKK Japan, Glue from Henkel Germany, paper from Ahlstrom Filtration Finland, Hollingsworth & Vose USA and Awa Paper Japan. Features: HiFloFiltro Oil Filter, product approved and production monitored - the only motorcycle oil filters in the world to carry the stringent TUV and ISO certifications OE Manufacturer - OE Specs plus performance Best Consumer Value - Best Quality and Price Most Complete Range for Motorcycles and ATV **Note: Replacement O-Rings are not included.
Galfer
Stainless Steel Hydraulic Front Brake Line
$50.36 - $147.69
You save up to $17.26 (10%)
  • Stainless Steel
(35)
Galfer Stainless Steel Hydraulic Front Brake Line Braided stainless steel casing has clear covering to protect both the line and the bike PTFE 62 Teflon liner creates "zero expansion effect", translating into a stronger, more progressive brake action Sport bike front line kits are 2 lines that travel from the master cylinder to the caliper except 08-09 Ninja 250 All kits include banjo bolts, washers and instructions Limited lifetime manufacturer's warranty **Closeouts are limited to stock on hand**
VIDEO     
Kuryakyn
Premium Mini Boards
$76.49 - $84.99
You save up to $15.00 (15%)
  • Chrome
(13)
Kuryakyn Premium Mini Boards Do you find that foot pegs are lacking in support, but don't want the bulkiness of a foot board? Kuryakyn has the perfect solution. Introducing Kuryakyn's newest innovation, the Premium Mini Board. This compact board combines the size & convenience of a peg with the comfort of a full sized floor board These 5 ½" long & 4" wide beauties were styled to complement Kuryakyn's Trident Pegs & Premium line of boards & board inserts So you can still ride in comfort without sacrificing style They also utilize splined adapters, so the mini board can be positioned forward, back, or center at almost any angle Also a great option for Driver Cruise Pegs **Note: Ensure proper clearance before installation in driver position
;
Back to Top