-
Fit
-
Quality
-
Installation
-
Recommend
Gary (Davie, FL)
2011 yamaha stryker
Had Cobra pipe put on a fi2000r. Couple hundred miles later… Made better low end response and cruises real smooth…
-
Fit
-
Quality
-
Installation
-
Recommend
Kevhonn (Seguin , TX)
FI2000R,,VTX1800C,,,,2007
Fits good. Operation, Good. Location installed controller, HR side cover. Performance gain, Yes
-
Fit
-
Quality
-
Installation
-
Recommend
Gary S (Hillsborough, NJ)
COBRA FI2000
2005 suzuki dl1000 vstrom. This is my second one. I got one for my 05 kawasaki nomad. Made both bikes run excellent, like they should have from the factory. No more pinging on the kawasaki. No more spitting and backfiring through the intake at 2800-4000 rpm on the suzuki. Easy install. Both were put on with the factory base settings. Both bikes are stock but have k&n air filters. Will by for future bikes.
-
Fit
-
Quality
-
Installation
-
Recommend
Gary R. (Gering, NE)
Worth it
Installation was fairly simple. It did require raising the tank and propping it up. Everything fit nicely on my Kawy 1600 Nomad. It didn't completely correct the throttle dead spot when shifting from first to second. It did help it a lot and the rest of the throttle responses are greatly improved. It seems to have knocked my gas mileage by about four or five miles per gallon. I think it is worth it. Bike runs much better.
-
Fit
-
Quality
-
Installation
-
Recommend
David (Clarksville, TN)
07 VN900LT
So far it has performed as expected.
-
Fit
-
Quality
-
Installation
-
Recommend
dave (loveland, CO)
fi2000r
Quick service and the part does what it said it would do.
-
Fit
-
Quality
-
Installation
-
Recommend
Guy B. (camargo, IL)
not happy
I sent it back after reading the instruction and found out that I would need a download from harley. The only reason I ordered it was to avoid having to do that. If I had that input when making the decision to order, it would have saved me 6.95 to ship it back. Not happy.
-
Fit
-
Quality
-
Installation
-
Recommend
justin (columbia city, IN)
fi2000r
I've got a Kawasaki Vulcan voyager. I bought the fi2000r with a new set of cobra tri ovals and put them on at the same time. I think I feel a power gain but really not sure. I do have some popping on decel and during throttle sometimes. I really don't know if it helped with the tri ovals because I put them on at the same time. I did tune it down a few notches and that seemed to help.
-
Fit
-
Quality
-
Installation
-
Recommend
eric m. (catonsville, MD)
'07 Nomad
The Fi2000r works great. My nomad now performs like I expected it to perform when it was new. Sorry I waited so long to make the purchase. Installation was a bit of a pain, but that is a Kawasaki thing. Even riding 2 up and lugging the motor a bit..no more pinging. I used to think the damn thing was going to blow apart. Well worth the time and money.
-
Fit
-
Quality
-
Installation
-
Recommend
Anthony M. (Salt Lake City, UT)
Best bang for the buck!
This thing is awesome! It took literally 30 minutes from the time I broke the first bolt to the time I had completed my tuning. I've got Cobra pipes and a K&N filter and this unit brought my bike to life like never before!! The popping on deceleration is gone. It is ridiculously smooth at lower RPMs. The first time I took it for a spin after installing it I was blown away by the fact I couldn't feel the surge when I shifted like usual. I've had my 2006 Boulevard M50 for a few years now and it has had the current setup for the last two years. So every change in performance was noticed. It was smoother at lower speeds, more stable feeling during deceleration, and cruising was greatly improved. I feel more power in every gear. The 'Butt Dyno' is telling me between 15 and 20 percent power improvement overall. Definitely a great investment!!
