Looks Awesome!
-
Fit
-
Quality
-
Installation
-
Recommend
Brax -
June 12, 2013(Lehi, UT)
The tail light looks great, and helps clean the bike up with the integrated turn signals. Didn't come with instructions, but if you just look at the two lights its really simple to switch them out. I would recommend this light, looks good, its brighter, and cars can see it better.
RUMBLE LED 09 600RR
-
Fit
-
Quality
-
Installation
-
Recommend
Jimmy -
May 22, 2013(NY, NY)
Looks beautiful; fancy signal lights. Don't waste your money. Bought two of them one from here and the other one from another site. The one from competitor only lasted 10 minutes of riding and a row of brake lights went out for good. The one from Motorcycle Superstore did the same thing with a row of signal lights that went out on the right side. It started off as intermittent problem and when you tapped on the glass that row of signal light would work again. That lasted 2 days and then stopped working.
wouldn't reccomend for FZ6
-
Fit
-
Quality
-
Installation
-
Recommend
Aaron -
July 06, 2012(Rockwall, TX)
It was the right shape, but had no way of attaching to the bracket, so it is just loose in the taillight assembly. Also, an entire bank of LEDs doesn't work
Good product, Good price
-
Fit
-
Quality
-
Installation
-
Recommend
timmee109 -
February 02, 2012(ft laud, FL)
Eazy to install, seems a little cheap. If it still works in a year or two I will be impressed any longer than that I would rate it a perfect 10.
Looks great!
-
Fit
-
Quality
-
Installation
-
Recommend
James -
December 06, 2011(Port Orange, FL)
I worked these in conjunction with some Rizoma turn signals for added safety and looks. Looks great now!
No Instuctions and good luck wiring the blinkers (2011 Ninja 250)
-
Fit
-
Quality
-
Installation
-
Recommend
BudBud -
June 07, 2011(Casper, WY)
So this product comes w/no instructions. So here are mine: OEM taillight is held in place by two bolts, remove bolts. Pull OEM taillight out. Pull out rubber grommet and metal thingy from OEM taillight and insert in new taillight. Insert new taillight. Insert new taillight "light bulb" into factory connector. Bolt on bike. As for getting those blinkers to work... Well, good luck... I had to use the old blinkers and splice the new wiring into the old blinker assembly.
