Jason
Jersey City, NJ
Good Product
Instruction was accurate and easy to follow. I chose not to install the license plate light / bolt, since the rear light is directly over the plate so there's plenty of illumination, by doing that no wires were needed to be spliced, truely a no cut kit. But for just under a Benjamin, 2 metal pieces and some bolts seemed expensive, but then again the bike looks so much better now. Targa is the way to go my friends.
Jeff F
Concord, NC
04 Monster
Diagrams for install are poor for the monster. until I had them email me the full color pics. Cleared up a bunch. Turn signal mounts interfered with the sargent seat. Had to trim down the TS mounts.
Mark
Honolulu, HI
Eliminator on a ducati 696
First off. Bike looks Tons better without the HUGE fender back there. blinkers are well positioned.
Everything fit well. My main negative with this kit: It took up what little underseat storage I had on the ducati. mainly due to the lock being relocated facing straight up. Can’t really store anything anymore for fear of jamming the seat release.
Also the license plate light is pretty weak. really only lights up the center 2 leters/numbers of my plate.
VICTOR BROWN
CHICAGO, IL
perfecto!
everything is perfect.... period!.
Alexander Kossack
Charlotte, NC
Not ment for all states.
I like the way it looks. It wasn't that hard to install, but wouldn't say it is easy, especially that the wires they send you aren't long enough. The two things I hated are that my license plate did not match any of the holes. I had to take my drill and expand my license plate holes so I could put it on and the directions this product comes with are a joke. Other than that it is a great product and looks a lot better.
Rob
Spotsylvania, VA
For a 2007 Kawasaki ZX6R
Overall the kit is good, but I did have some issues with it. First one is the instructions, they were horrible, and as much as we pay for this I expected much better instructions (then again I may be spoiled by crutchfield instructions.) Second, this is a kit; I should not have to cut wires for a kit. Third, the provided turn signals would not fit in the base plate, the holes for the turn signals were not large enough, and I ended up having to get extra bits for my dermal and boring the holes large enough for them. Once I did the mudding needed everything went on fine. The kit looks good, but these are some major flaws for a "kit".
Dave R.
Newhall, CA
Competition Werkes, Fender eliminator kit.
This eliminator kit is absolutely awesome. If you own a 650 ninja it is perfect for it. Very sweet. I love mine. It took a friend of mine and I about an hour or so to install it, soldering and all. Great parts and high quality. You can figure it out; you don't need to be a mechanical genius. When you finish it looks awesome.
Ryan
Everett, MA
05" cbr 600rr
Looks awesome and makes the tail of the bike look very stream line super clean. The only down side of this kit is the install. The directions almost look like they’re out of a cracker jack box and have photo copied 20 times but once you start looking at the pics for a few you get the look of it. But I highly recommend this kit really does look like a completely different bike after.
Jeff
st. louis, MO
Fender Eliminator
Took 30 min. to install and looks great on an Interceptor. A little pricey but worth it.
Alexandra Cressey
York Beach, ME
Quick, Easy, Great Kit
Put this on my 2003 Ducati Monster. It was extremely quick and easy to install. The instructions are pretty easy to follow. Only took about 45 minutes to disassemble, put on the kit and reassemble.
Donovan
Madison, AL
A lot of money for very little return
I wanted to reduce the lines on my 636RR by removing all of the plastic cowling on the back of the bike. The product did exactly that, though I really only needed the license plate mount. I feel it was very expensive for what you got but hey, I love my bike. Too bad I'm not a metal worker or I'd build the license plate holder myself and sell it for half the cost. I'd make a fortune!
chris oliver
orlando, FL
katana 02 fender eliminator
Great product needs more thorough instructions but you can figure it out. Looks nice makes the Katana look a lot better
Jody G.
Woobury, CT
Competition Werkes - Fender Eliminator Kit
The concept is great however the directions and measurements were terrible. I only needed this kit to remount my license plate. If you didn't read through the directions first you would have drilled additional holes you didn't need. In addition the measurement for the mounting hole to mount the bracket to the battery box was off by about 3/8". Some of the hole patterns didn't line up...maybe it was stamped backwards. The hole for the license plate light wire makes no sense at all. If you drilled that hole you wouldn't be able to mount the light because is totally out of location. I had to remount the entire unit and drill my own holes and the unit could have been deburred a little better but once the unit is mounted and your plate is on, it looks great. I did love the spring loaded plate holder and the roller wheel. The stainless steel seems okay but time and weather will tell more.
jon
little chute, WI
1999 CBR fender eliminator
Instructions weren't very clear...Took longer than I had hoped to install. Had to cut plastic. Overall appearance is good.
Lynn Kendall
Wildwood, FL
Streamline...
This product did everything I was hoping by getting rid of that original equipment cumbersome plastic mud flap that held a simple tag/plate. My bike now how that sleek, streamline look she should.
Mike H
atlanta, GA
Competition Werkes Fender Eliminator
I'm very pleased with the fender eliminator!!! I ride a 2006 GSXR 1000. It was easy to install. I was concerned ordering it at first because of the reviews saying it took a couple of hours to install, but I installed mine in fifteen minutes.
Jason Taylor
Medford, OR
01 zrx 1200
This is the only modification I have done to my bike. It eliminates the ugly stock fender, brings the blinkers in closer, and brings the taillight in. It's like getting three mods for the price of one! Instructions weren't the greatest however it is easy to install.
bw
Advance, HI
01 F4i Fender Elim. Kit
Once installed this kit looks great. I also went with an integrated led brakelight/turnsignal so I didn't have to deal with the turn signal mounts. The directions were fairly spotty, but once you get into it you can figure it out. However, the notion of "just a few hours with some household tools and a hacksaw" is way off. We used just about every tool in my shop and an air compressor driven cutting tool and it took around 5 hours. The cleaned up look is definitely worth it though, no matter how
jxt
Seattle, Northwest
Honda F4i Eliminator Kit
This kit is awesome! Fits perfectly, looks great. I painted mine gloss black before installation. Instead of using the stock signals, I picked up a pair of LED turn signals and they look great. The only downside to this kit is the miserable instructions! What should have been an hour to an hour and a half took nearly four! The included instruction sheet is subpar, especially if anyone out there who tries to install this is not mechanically inclined. Luckily I have worked on cars for about
Harold
San Diego, British Co
Review of Fender Eliminator Kit
Overall my impressions. 1. It took a bit longer to install than I thought it would; the biggest problem is the poor quality of the directions. 2. Good quality components; fit for everything was pretty good; just required a bit of tweaking to get the edges to stay under the sides of the bodywork, and the fit for the stock turn signals could have been better. 3. Finished look is great, especially with my silver 2003 F4i .... the aluminum blends well with the bodywork. 4. It might be nice if it