Skip Navigation LinksStreet Bike > Street Bike Parts > Yamaha Parts > 2005 Yamaha FZ1 > Bodywork > Fender Eliminator Kits (1) > Competition Werkes Fender Eliminator Kit
Competition Werkes
Fender Eliminator Kit
$116.99  Sale
Lowest Price Guarantee
MSRP $116.99-179.95
Customer Rating:  


Item Availability status
Available - Usually leaves our warehouse in 2 business day(s).
All 2005 Yamaha FZ1 Parts
Email a Friend
Share on Facebook
Product Description
Competition Werkes Fender Eliminator Kit

  • Eliminates the rear fender to give your bike a cleaner race-style look
  • Quality, all stainless steel kits move the turn signals up and in and relocate the license plate light on most models
  • After market signals and license plate lights supplied when needed
  • Storage area is kept as stock as possible
  • Hardware and instructions for easy installation
  • Some cutting and drilling may be necessary on some models, but only to the black plastic fender, never the frame or body work (except on Ducati Monster)
Click swatch to view color options
Customer Reviews
Average Rating -  Based on 20 Review(s)
Fit   3.9
Features   4.3

Finish   4.6
Cost Benefit   4.2

Durability   4.5
Overall   4.3
Latest Reviews
Fit   5.0
Finish   5.0
Durability   4.0
Features   4.0
Cost Benefit   3.0
Overall   4.2
Jason Jersey City,  NJ Good Product Instruction was accurate and easy to follow. I chose not to install the license plate light / bolt, since the rear light is directly over the plate so there's plenty of illumination, by doing that no wires were needed to be spliced, truely a no cut kit. But for just under a Benjamin, 2 metal pieces and some bolts seemed expensive, but then again the bike looks so much better now. Targa is the way to go my friends.
Fit   4.0
Finish   4.0
Durability   4.0
Features   4.0
Cost Benefit   4.0
Overall   4.0
Jeff F Concord,  NC 04 Monster Diagrams for install are poor for the monster. until I had them email me the full color pics. Cleared up a bunch. Turn signal mounts interfered with the sargent seat. Had to trim down the TS mounts.
Fit   5.0
Finish   5.0
Durability   5.0
Features   3.0
Cost Benefit   5.0
Overall   4.6
Mark Honolulu,  HI Eliminator on a ducati 696 First off. Bike looks Tons better without the HUGE fender back there. blinkers are well positioned. Everything fit well. My main negative with this kit: It took up what little underseat storage I had on the ducati. mainly due to the lock being relocated facing straight up. Can’t really store anything anymore for fear of jamming the seat release. Also the license plate light is pretty weak. really only lights up the center 2 leters/numbers of my plate.
Fit   5.0
Finish   5.0
Durability   5.0
Features   5.0
Cost Benefit   5.0
Overall   5.0
VICTOR BROWN CHICAGO,  IL perfecto! everything is perfect.... period!.
Fit   1.0
Finish   5.0
Durability   5.0
Features   5.0
Cost Benefit   5.0
Overall   4.2
Alexander Kossack Charlotte,  NC Not ment for all states. I like the way it looks. It wasn't that hard to install, but wouldn't say it is easy, especially that the wires they send you aren't long enough. The two things I hated are that my license plate did not match any of the holes. I had to take my drill and expand my license plate holes so I could put it on and the directions this product comes with are a joke. Other than that it is a great product and looks a lot better.
Fit   2.0
Finish   5.0
Durability   5.0
Features   4.0
Cost Benefit   4.0
Overall   4.0
Rob Spotsylvania,  VA For a 2007 Kawasaki ZX6R Overall the kit is good, but I did have some issues with it. First one is the instructions, they were horrible, and as much as we pay for this I expected much better instructions (then again I may be spoiled by crutchfield instructions.) Second, this is a kit; I should not have to cut wires for a kit. Third, the provided turn signals would not fit in the base plate, the holes for the turn signals were not large enough, and I ended up having to get extra bits for my dermal and boring the holes large enough for them. Once I did the mudding needed everything went on fine. The kit looks good, but these are some major flaws for a "kit".
Fit   5.0
Finish   5.0
Durability   5.0
Features   5.0
Cost Benefit   4.0
Overall   4.8
Dave R. Newhall,  CA Competition Werkes, Fender eliminator kit. This eliminator kit is absolutely awesome. If you own a 650 ninja it is perfect for it. Very sweet. I love mine. It took a friend of mine and I about an hour or so to install it, soldering and all. Great parts and high quality. You can figure it out; you don't need to be a mechanical genius. When you finish it looks awesome.
Fit   4.0
Finish   5.0
Durability   5.0
Features   5.0
Cost Benefit   4.0
Overall   4.6
Ryan Everett,  MA 05" cbr 600rr Looks awesome and makes the tail of the bike look very stream line super clean. The only down side of this kit is the install. The directions almost look like they’re out of a cracker jack box and have photo copied 20 times but once you start looking at the pics for a few you get the look of it. But I highly recommend this kit really does look like a completely different bike after.
Fit   5.0
Finish   5.0
Durability   5.0
Features   1.0
Cost Benefit   3.0
Overall   3.8
Jeff st. louis,  MO Fender Eliminator Took 30 min. to install and looks great on an Interceptor. A little pricey but worth it.
Fit   1.0
Finish   3.0
Durability   2.0
Features   3.0
Cost Benefit   3.0
Overall   2.4
Donovan Madison,  AL A lot of money for very little return I wanted to reduce the lines on my 636RR by removing all of the plastic cowling on the back of the bike. The product did exactly that, though I really only needed the license plate mount. I feel it was very expensive for what you got but hey, I love my bike. Too bad I'm not a metal worker or I'd build the license plate holder myself and sell it for half the cost. I'd make a fortune!
Copyright 1998-2009 Motorcycle Superstore Inc. All rights reserved.